Afternoon guys the next job in for the car is to remove the wood sections in the car, the door ones im guessing you remove after taking door cars off, but the ones along the glovebox and around the steering wheel are the ones not sure about advice on this be cool thanks.
Removing wood sections in the car..
- Thread starter Rangelee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
What are your plans for them? and i belive they just pop off (with some force) careful not to bend them tho..
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
very nice!! Dont forget the rules... Pictures or it didnt happen 
About the same advice for all of them. Get behind them and look / feel for fittings. Some have those nasty single use gripping washers. Once you're happy that you've cleared any of them push the fittings out whilst GENTLY levering from the front. More push than pull and you should get away without cracking the surface.
I might be being over-cautious but if you crack the veneer surface it might show through the piano finish. If in doubt you can probably buy these bits in simple plastic from breakers for pennies as few people want them.
