big dave2
New Member
- Posts
- 637
IF it was easy ona series everybody would have done it including ME....dunno what yer worried about most series dont go fast enough to need discs,if your set-up is ok they,ll be fine.....dave
removing stupid drum brakes!!!
- Thread starter dan dan the landy man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pig iron
New Member
- Posts
- 11
- Location
- dullstroom south africa
had the same problem with a landy we used in mozambique to launch dive boats,the salt caused the drums to fuse with the brake shoe material.i used a cutting torch to heat the drum and burn the break shoe,then gave it a good few bashes with a 4 pound mallet and it came off.only heat the outer ring and not the face or you will stuff the oil sealin the hub.park the landy outside as there will be plenty smoke
w3526602
Active Member
- Posts
- 172
- Location
- South Wales
Hi,
Disc brakes? Yes, I have them on my 1960 S2.
Easily? Probably ..... but expensive.
I don't even have a servo, even though I'm told it is necessary.
602
Disc brakes? Yes, I have them on my 1960 S2.
Easily? Probably ..... but expensive.
I don't even have a servo, even though I'm told it is necessary.
602
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
