REMOVING RADIO - 94 Disco

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Biggles

New Member
Posts
4
I managed to use a little ingenuity to get the rest of the dash apart to replace the heater control unit. Alas, the radio remains my last obsticle.

I'm sure there is a simple set of steps but my ingenuity seems to have been exausted on the previous steps.

Any recommendations and guidance would be greatly appreciated.

Thanks,
Peter
 
It has one small hole on each side of the radio. Can I use a feeler gage or something similar?

Thanks for your post!
Peter
 
you need 2 pcs of anything stiff and straight. and thin.
galvanised wire is ok.
 
strange aint it?
fella asking how to remove a radio on this thread.
then on the next thread some other fella is asking how to recode a radio???
 
Thanks all for your help and comments.

In case someone else has the same problem, this radio has two small holes, one on each side of the radio. I found that a small allen wrench and many turns counterclockwise did the trick. I noticed in another post that someone mentioned 5/64 being the size but I won't swear by that.

Good luck and thanks!
Peter
 
Back
Top