Removing Lettering From Vehicles

S

Simplicity47

Guest

• Feb 28, 2005

• #1

With most vehicles there is lettering glued on the car which usually
has the brand and model. Does anyone know the best way to remove it
without messing up the vehicle?

 

T

tom

Guest

• Feb 28, 2005

• #2

easyoff oven cleaner, or go to a body shop and for around $50 you can get a
pinstripe removing tool. it will last about 40 ft.
"Simplicity47" <[email protected]> wrote in message
news:[email protected]...
> With most vehicles there is lettering glued on the car which usually
> has the brand and model. Does anyone know the best way to remove it
> without messing up the vehicle?
>

 

S

Snow

Guest

• Feb 28, 2005

• #3

Are you talking a sticker type or a emblem style? sticker lots of products
out there that can do it, emblem type, best I have found is a extra sharp
putty knife (metal, plastic may work..maybe) and carefully slide it behind
the emblem, being very careful not scratch paint. or I have heard some use
a very fine wire and cut through the adhesive.. not sure how this is done or
how well it works.. Either way you have to be careful and will still need
something to remove the extra adhesive that's left behind.

Snow...

"Simplicity47" <[email protected]> wrote in message
news:[email protected]...
> With most vehicles there is lettering glued on the car which usually
> has the brand and model. Does anyone know the best way to remove it
> without messing up the vehicle?
>

 

G

Greg

Guest

• Feb 28, 2005

• #4

I had to break a vent window out on a truck once, locked keys in it,
anyway, went to body shop for new window, not in stock so he came out and
duct taped the window to the serounding body, I asked how he would get the
duct tape off paint after baking for a week in summer, he said accetone, it
all came off easy, sure that would work for whatever adhesive the stickers
have.

"Simplicity47" <[email protected]> wrote in message
news:[email protected]...
> With most vehicles there is lettering glued on the car which usually
> has the brand and model. Does anyone know the best way to remove it
> without messing up the vehicle?
>

 

S

Simplicity47

Guest

• Feb 28, 2005

• #5

I'm actually talking about the emblem type lettering, not the stickers.
The glue or what ever they use is usually like cemented on, and I was
wondering how to get that off.

 

T

tom

Guest

• Feb 28, 2005

• #6

air hammer with a flat chisel tip
"Simplicity47" <[email protected]> wrote in message
news:[email protected]...
> I'm actually talking about the emblem type lettering, not the stickers.
> The glue or what ever they use is usually like cemented on, and I was
> wondering how to get that off.
>

 

H

HarryS

Guest

• Feb 28, 2005

• #7

Do not use acetone it will remove your paint, or oven cleaner bad too, use
a regular hair dryer on high, DO NOT USE A HEAT GUN, when soft remove the
emblem, go to the local hardware store or Wal-Mart and buy some OOPS to
remove the glue residue.

HarryS

"Simplicity47" <[email protected]> wrote in message
news:[email protected]...
> With most vehicles there is lettering glued on the car which usually
> has the brand and model. Does anyone know the best way to remove it
> without messing up the vehicle?
>

 

T

tom

Guest

• Mar 1, 2005

• #8

I have been using easyoff oven cleaner for over 30 years to remove the
lettering on trucks that are sold, and have used it to remove lettering on
race cars also. not once have I ever had a problem with the paint
"HarryS" <[email protected]> wrote in message
news:[email protected]...
> Do not use acetone it will remove your paint, or oven cleaner bad too,
use
> a regular hair dryer on high, DO NOT USE A HEAT GUN, when soft remove the
> emblem, go to the local hardware store or Wal-Mart and buy some OOPS to
> remove the glue residue.
>
> HarryS
>
> "Simplicity47" <[email protected]> wrote in message
> news:[email protected]...
> > With most vehicles there is lettering glued on the car which usually
> > has the brand and model. Does anyone know the best way to remove it
> > without messing up the vehicle?
> >
>
>

 

H

HarryS

Guest

• Mar 1, 2005

• #9

That may be true, but if some one never changes their oil, changes the
filter at 3k then tops off with fresh oil does not make it right or a good
practice. I know someone who does this and trades their vehicle every 3
years.

Oven cleaner contains caustic soda and it is not good for your paint
regardless of your practices to do so. Race cars get painted many times
over their short lives, and lettering on vehicles sold well you do not have
to deal with them 5 years down the road when the paint starts to chalk.

Poor practices no matter of good intentions are just that, poor.

HarryS

"tom" <[email protected]> wrote in message
news[email protected]...
>I have been using easyoff oven cleaner for over 30 years to remove the
> lettering on trucks that are sold, and have used it to remove lettering on
> race cars also. not once have I ever had a problem with the paint
> "HarryS" <[email protected]> wrote in message
> news:[email protected]...
>> Do not use acetone it will remove your paint, or oven cleaner bad too,
> use
>> a regular hair dryer on high, DO NOT USE A HEAT GUN, when soft remove
>> the
>> emblem, go to the local hardware store or Wal-Mart and buy some OOPS to
>> remove the glue residue.
>>
>> HarryS
>>
>> "Simplicity47" <[email protected]> wrote in message
>> news:[email protected]...
>> > With most vehicles there is lettering glued on the car which usually
>> > has the brand and model. Does anyone know the best way to remove it
>> > without messing up the vehicle?
>> >
>>
>>
>
>

 

F

Frank Morris

Guest

• Mar 2, 2005

• #10

Howdy All,
I used dental floss. A friend used dental floss and a heat gun. I
would use a hair dryer instead of the heat gun.

Frank X. Morris
http://community.webtv.net/Sulkhalil/SalukiCornerChime