Relay 6 and relay 7 relocating.

P38 guy · Jul 18, 2024

Hi I’ve up to now changed 5 fuse boxes because of relay 6 and relay 7 and I heard that they could be located outside the fuse box and I’m looking to completely remove them from the fuse boxes and connect 2 relays to the wiring. Did anyone do it ? I got relay 6 and 7 drawing but I don’t understand it
I will appreciate some help

biketeacherdave · Jul 18, 2024

What exactly is the reason you keep changing yhe fuse boxes for ??

kermit_rr · Jul 18, 2024

And which car is it?

marjon · Jul 18, 2024

That diagram looks like rubbish (sorry)
What do the relays control? ( dont know what model you have)

J

biketeacherdave · Jul 18, 2024

They are the blower motor circuit relays which usually burn out on yhe circuit board I suspect he keeps swopping fuse boxes instead of fixing the board.
Pretty much all these fuse boxes by this age will have dry joints and burn outs on them which is why it's better to repair than replace.

Sadly I'm not doing repairs to them any more to much going on etc etc.

Datatek · Jul 18, 2024

I suspect the problem is the connector contacts for the relays are slack so they heat up. Fixing the problem is better than a bodge.

P38 guy · Jul 19, 2024

biketeacherdave said:
What exactly is the reason you keep changing yhe fuse boxes for ??

Because it keeps burning

P38 guy · Jul 19, 2024

biketeacherdave said:
They are the blower motor circuit relays which usually burn out on yhe circuit board I suspect he keeps swopping fuse boxes instead of fixing the board.
Pretty much all these fuse boxes by this age will have dry joints and burn outs on them which is why it's better to repair than replace.

Sadly I'm not doing repairs to them any more to much going on etc etc.

No one in my country repairs them

P38 guy · Jul 19, 2024

kermit_rr said:
And which car is it?

1999 Range Rover p38 thor

P38 guy · Jul 19, 2024

kermit_rr said:
And which car is it?

1999 Range Rover p38

marjon said:
That diagram looks like rubbish (sorry)
What do the relays control? ( dont know what model you have)

J

I copied it from rave and drew it, It is lol

biketeacherdave · Jul 19, 2024

Have a little search you will find my how to guide on repairing the p38 fuse box.

biketeacherdave · Jul 19, 2024

Here you go

fuse box strip down and repair

So bit of back ground on faults first. When I got the RR the blowers didn't exactly blow just a little breeze bit of research led me to relay 7 in the fuse box it did have a badly burnt pin and the fuse holder was a little melted. New relays problem solved but new I would have to tackle the...

www.landyzone.co.uk

Datatek · Jul 19, 2024

P38 guy said:
Because it keeps burning

As I said, I suspect the problem is the connector contacts for the relays are slack so they heat up.
Nip up the the female part of the connector contacts and the problem will go away.

pwood999 · Jul 20, 2024

Datatek said:
As I said, I suspect the problem is the connector contacts for the relays are slack so they heat up.
Nip up the the female part of the connector contacts and the problem will go away.

And after sorting the socket, consider using a higher capacity relay that will have heavy duty contact inside.

P38 guy · Jul 21, 2024

I only want to relocate it I won’t open it or do anything to the fuse box

pwood999 · Jul 22, 2024

All the wiring info you need for a bodge is in RAVE. Personally if it’s damaged 5 fuse boxes I would check why they are getting burnt and sort that first.

P38 guy · Aug 27, 2024

biketeacherdave said:
Here you go

fuse box strip down and repair

So bit of back ground on faults first. When I got the RR the blowers didn't exactly blow just a little breeze bit of research led me to relay 7 in the fuse box it did have a badly burnt pin and the fuse holder was a little melted. New relays problem solved but new I would have to tackle the...

www.landyzone.co.uk

I’m preparing now, it got burns in not usual places

Mark Piercy · Aug 27, 2024

I'd be checking the blower motors for any abnormalities

P38 guy · Aug 27, 2024

Mark Piercy said:
I'd be checking the blower motors for any abnormalities

The whole ac is gone

Datatek · Aug 28, 2024

P38 guy said:
The whole ac is gone

The blower motors are nothing to do with the ac

Relay 6 and relay 7 relocating.

Member

Well-Known Member

Very

Well-Known Member

Well-Known Member

Well-Known Member

Member

Member

Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Attachments

Well fumbled member....

Member

Well-Known Member

Similar threads