REKT
Active Member
- Posts
- 106
- Location
- Southend Essex
After spending a bit of time with my girlfriends dad at a local offroad club I quickly became addicted and had to buy my own project off roader, it didn't take long to track down a cheap D1 300tdi but with cheap comes problems as the pictures below will show haha.
Here it is in standard form
Had to have a new passenger side sill as the old one had more holes than swiss cheese and the drivers needed a few patches
Another hole in the passenger footwell that's been patched up now
and a rather big hole in the boot under the passenger rear seat (didn't get a photo of the driver side but that needs welding too)
On a better note here are some photos of the bits added on
Here's the 2" lift kit going on de carbon front shocks and Pro comp ES 9000 on the rear with dislocation cones retention plates and shortened front turrets.
Got a set of 5 16" X 8 modular wheels (might be ordering tyres this week)
Only picture I got of the EGR delete, on the same day I fitted the decat and "sports" exhaust from paddock (i'll try upload the video soon)
and the most recent photo of it lifted, few more bits of welding a brake pipe and MOT and we should be on the road
Here it is in standard form
Had to have a new passenger side sill as the old one had more holes than swiss cheese and the drivers needed a few patches
Another hole in the passenger footwell that's been patched up now
and a rather big hole in the boot under the passenger rear seat (didn't get a photo of the driver side but that needs welding too)
On a better note here are some photos of the bits added on
Here's the 2" lift kit going on de carbon front shocks and Pro comp ES 9000 on the rear with dislocation cones retention plates and shortened front turrets.
Got a set of 5 16" X 8 modular wheels (might be ordering tyres this week)
Only picture I got of the EGR delete, on the same day I fitted the decat and "sports" exhaust from paddock (i'll try upload the video soon)
and the most recent photo of it lifted, few more bits of welding a brake pipe and MOT and we should be on the road
