- Posts
- 33,620
- Location
- North Shropshire
I should probably look at mine as this is likely on the cards, it currently makes no sound of any kind
P38A Regular tapping noise from engine bay
- Thread starter les148
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
Might be switched off by Nanocom.
- Posts
- 33,620
- Location
- North Shropshire
If you mean the alarm, it's enabled and the indicators flash when it's activated. Unless there's an option to turn just the sound off?
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
Mine also doesn't make a sound, which is fine by me!
- Posts
- 33,620
- Location
- North Shropshire
It's fine by me too, i don't want it to start tapping though
- Posts
- 58,170
- Location
- Preston Lancs.
Yes you can select which sounder is used.
- Posts
- 33,620
- Location
- North Shropshire
Set to BBUS, other choice is klaxon
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
Can you not also set it to lights and sound or just lights or all off? Been a long time since I looked.
- Posts
- 58,170
- Location
- Preston Lancs.
Datatek
Well-Known Member
- Posts
- 44,909
- Location
- Near Poitiers SW France
- Posts
- 33,620
- Location
- North Shropshire
There's a separate seeing for lights/indicators, or you can disable the alarm entirely
- Posts
- 58,170
- Location
- Preston Lancs.
Can't remember there are various scenarios.
- Posts
- 33,620
- Location
- North Shropshire
Assume BBUS means the unit under the fusebox?
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
Yes, I disabled everything on mine after the missus got dumped somewhere!
Datatek
Well-Known Member
- Posts
- 44,909
- Location
- Near Poitiers SW France
Yes you can set the alarm to OFF.
- Posts
- 58,170
- Location
- Preston Lancs.
Yes you can, you can set various lamps to flash on alarm.
Datatek
Well-Known Member
- Posts
- 44,909
- Location
- Near Poitiers SW France
Low down in front of the fuse box. You can leave it unplugged.
Datatek
Well-Known Member
- Posts
- 44,909
- Location
- Near Poitiers SW France
But not just lights.
- Posts
- 33,620
- Location
- North Shropshire
Isn't that what the PO tried?
- Posts
- 58,170
- Location
- Preston Lancs.
No not just lights, but you can select which lights flash with alarm.
