Recon, low mileage engine wanted!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

macdoog

New Member
Posts
35
Location
Stowmarket, Suffolk
HI All
I tried to post in the wanted section but unable to? Anyway I want to swop out old for reasonably new. So where do I go for a decent recon bottom end or a good low mileage example...I know you lot are getting rid of them for tdi engines so they must be about!!! HELP!

Thanks to Land Raver an edit!!

2.2 petrol 5 bearing!!
 
Last edited:
Hello macdoog & welcome.

You might want to confirm what engine you're looking for ....2.25 diesel / petrol 3mb or 5mb
2.5di etc. I assume you've tried the favorite auction site :)

Turners offer some options but you'll need deep pockets
 
I don't think you'll find any good series motors left, I reckon they're all long worn out in one way or another. Have a look at the state of the 1984 motor I've just rebuilt, bottom end was fine but cam was nobbered, most series motors are much older than that too! Why don't you do yours, an engineering shop will only need it for a few days then you can reshell it / new pistons and know its good and sorted then.
 
Rattlegun said:
I don't think you'll find any good series motors left, I reckon they're all long worn out in one way or another. Have a look at the state of the 1984 motor I've just rebuilt, bottom end was fine but cam was nobbered, most series motors are much older than that too! Why don't you do yours, an engineering shop will only need it for a few days then you can reshell it / new pistons and know its good and sorted then.
Click to expand...

exactly the point and case mate ..........and costs a fraction of what it would cost for a reconditioned engine :D

all i need to do with mine now is get the bleddy skew gear set up right and pray the new bush ive machined for it doesnt fail :eek:
 
Rattlegun said:
I don't think you'll find any good series motors left, I reckon they're all long worn out in one way or another. Have a look at the state of the 1984 motor I've just rebuilt, bottom end was fine but cam was nobbered, most series motors are much older than that too! Why don't you do yours, an engineering shop will only need it for a few days then you can reshell it / new pistons and know its good and sorted then.
Click to expand...

2.25??? petrol/diesel??????????? whithams has a bunch on recons going about 150quid complete
 
Rattlegun said:
I think you'll find they're takeouts (ie fecked old motors). Someone on ollr got one and it was a bag o ****e.
Click to expand...

Those are new recons never used taken out of storage, whats wrong with that?? Last week they had new never used still wraped in plastic. this week they are used take outs

Worth a phone call at the least
 
Thor1950 said:
Those are new recons never used taken out of storage, whats wrong with that?? Last week they had new never used still wraped in plastic. this week they are used take outs

Worth a phone call at the least
Click to expand...

its the same script with engines bought from the well known auction site

they look reconditioned nice clean but alass theyre on a friggin pallet and cannot be seen or heared running and more than likely have not been reconditioned

any booger can clean and repaint an engine then pass it on as reconditioned

if i was either buying or selling a recon engine you can mark my words as gospel there would be a receipt for any and evry part and bit of machining that was done

the only true way to guarrantee yer getting a recon engine is to buy a complete intact sh1tter then recon that yerself then swap it into your vehicle

you then have your old engine to do the same to then either keep that as spare or sell as reconditioned with the doccumented proof you did it and possibly recoup 75% of yer initial outlay back ;)
 
macdoog said:
HI All
I tried to post in the wanted section but unable to? Anyway I want to swop out old for reasonably new. So where do I go for a decent recon bottom end or a good low mileage example...I know you lot are getting rid of them for tdi engines so they must be about!!! HELP!

Thanks to Land Raver an edit!!

2.2 petrol 5 bearing!!
Click to expand...

Just have a word with our guru lamesfartin, he'll knock you one up in his dreams. :D:D
 
johnny curt 1 said:
its the same script with engines bought from the well known auction site

they look reconditioned nice clean but alass theyre on a friggin pallet and cannot be seen or heared running and more than likely have not been reconditioned

any booger can clean and repaint an engine then pass it on as reconditioned

if i was either buying or selling a recon engine you can mark my words as gospel there would be a receipt for any and evry part and bit of machining that was done

the only true way to guarrantee yer getting a recon engine is to buy a complete intact sh1tter then recon that yerself then swap it into your vehicle

you then have your old engine to do the same to then either keep that as spare or sell as reconditioned with the doccumented proof you did it and possibly recoup 75% of yer initial outlay back ;)
Click to expand...

JC it said had original paper work.

How is your recon doing got it running or you still walking

But the home reconditioned motor doesn't mean the noob knew what the were doing anyone can create a paper file on a
motor
 
Last edited:
macdoog said:
HI All
I tried to post in the wanted section but unable to? Anyway I want to swop out old for reasonably new. So where do I go for a decent recon bottom end or a good low mileage example...I know you lot are getting rid of them for tdi engines so they must be about!!! HELP!

Thanks to Land Raver an edit!!

2.2 petrol 5 bearing!!
Click to expand...

i may have one ,definately got a 5 brg block
 
You must log in or register to reply here.

Similar threads

A
Freelander 1 Now we are 2.
Replies
19
Views
1K
Alex1000
A
xDParis64
IRD Fail???
2
Replies
25
Views
2K
Alibro
Alibro
Seaswood
Shifting into reverse & high low transfer case.
Replies
10
Views
1K
Seaswood
Seaswood
G
Coolant temperature sender Series 3 2.25 diesel question.
Replies
5
Views
1K
Guidoma
G
J
Options for adding CDL - 2003 D2 V8 Auto
Replies
4
Views
804
sierrafery
sierrafery
Back
Top