P38A Rear radius arms

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well you av got a lot more faith in your work than I have in mine there's know way on this gods earth I would get in a plane I had built just told the missus the story of these bushes and making tools she wouldn't even get in the car I've I built the tools let alone a plane she still be laughing in an hour
 
Well you av got a lot more faith in your work than I have in mine there's know way on this gods earth I would get in a plane I had built just told the missus the story of these bushes and making tools she wouldn't even get in the car I've I built the tools let alone a plane she still be laughing in an hour

Some can, some can't, that's life. ;):D
 
Can anyone tell me the part number for the nut that goes on the long bolt in the chassis on the front of the rear radius arm and also should you replace the bolt aswell as the nut thanks
 
the nut is ANR3140 and the big long bolt is ANR6920 available at Rimmerbros, RAVE doesn't say you need to use a new bolt, just the usual don't tighten fully till its all back together on the ground.
 
My bloke up garage managed to get bushes in hooray one side down one to go
 

Attachments

  • IMG_0598.JPG
    IMG_0598.JPG
    553 KB · Views: 139
Next problem the rear bolts don't line up the axle has moved round a bit what's the best way of moving it back just jacking it trial and error
 
I would do, at std ride height (which is more or less mid range), tho Rave suggests you torque before removing the axle stands ie wheels off, but the suspension's still loaded
 
Back
Top