Disco 1 Rear passenger window
- Thread starter gazza1591
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,609
The only guides available would be RAVE and perhaps the Haynes workshop manual.
It shouldn't be difficult after removing the door card, unbolting the window motor, and/or lowering the glass to unbolt the regulator then unbolting the window surround, and after moving a bit of plastic trim lifting the glass from the top of the door.
There maybe somethings else in the way but Ha-Ho unbolt that also, time consuming maybe, but simples.
It shouldn't be difficult after removing the door card, unbolting the window motor, and/or lowering the glass to unbolt the regulator then unbolting the window surround, and after moving a bit of plastic trim lifting the glass from the top of the door.
There maybe somethings else in the way but Ha-Ho unbolt that also, time consuming maybe, but simples.
Silverbeard50
Member
- Posts
- 99
- Location
- Bristol
You have to remove the top door frame from the door shell; quite straightforward, just nuts and bolts.
discool
Well-Known Member
- Posts
- 13,609
Already mentioned "window surround " as in frame
Last edited:
Similar threads
Disco 3 (LR3)
Rear differential swap