Rear passenger window regulator

burrich1 · Sep 21, 2015

Apologies if this has been covered. Just fitted a new rear window regulator...how the hell does it secure to the base of the window?!?
Advice please....
The metal tab you can see in the pic....how does that secure to the window please?

burrich1 · Sep 21, 2015

This piccie.......

saxavordian · Sep 21, 2015

I had done my rear passenger door recently and on my old one was the attachment clamp that you fix onto the new one. This would fit snuggly on the bottom of the glass for it to push up and pull down. If this loose then you could use foam to pad or doublesided tape.

burrich1 · Sep 21, 2015

Thanks for your reply

As you can see in the piccie I have got a plate with 2 holes. What attaches here? Pictures? Part number? I have been told that ASR 2569 was the right part. I have got one of these, it doesnt look right.

saxavordian · Sep 21, 2015

When you took out the old did you keep it. Here are two pictures

As you can see you need to transfer the old clamp to the new plate. They do not come with unless you order that particular part. If you do not have the original you maybe able to fashion a clamp plate with metal and plastic for the grip. Hope this helps

burrich1 · Sep 22, 2015

Hi..thanks for the piccies. The previous owner sent me the new regulator minus the clamp!! I have spoken to a Land Rover shop and they sent ASR2569. Its a soft rubber piece. You would nt happen to know the part number.....☺

saxavordian · Sep 22, 2015

asr2569 is the part needed to attach to the plate on the regulator then the glass fits into the rubber part tight. As you will have seen on my two pictures only one nut an bolt is needed on the top part of the plate. hope this helps

Rear passenger window regulator

burrich1

New Member

burrich1

New Member

Attachments

saxavordian

Well-Known Member

burrich1

New Member

saxavordian

Well-Known Member

burrich1

New Member

saxavordian

Well-Known Member

Similar threads