Rear metal strip - before bumper.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

AJD

Member
Posts
17
Help please!
Firstly, what is the rear strip called that basically goes behind the rear bumper and under the back door -its a double dog leg shape. There must be a disco owner there who knows what I mean - its the one that goes rusty!
:)
Secondly, is it possible to buy one ready manufactured as a LR part, or do I need to arrange to have one fabricated? Has anyone had this done, and if so what was the cost??

Would appreciate any help.
 
Its a 1994 - '95 model year. Its actually the bit that actually lies under the door when closed, I don't think it could be plastic as its an integral part of the body. If you look at the rear bumper, there is a tread plate on top of the bumper, and then behind that going inwards to the car is the metal piece that has corroded. There is a plastic strip that runs on top of it along the width of the door.
 
Could be, it sits between the plastic strip and the rubber seal. its a double L shape. If you could e-mail me, tomorrow I could send a photograph.
 
sound like you mean the rear cross member. If so a new panel is available at about £150. it's a big job just done one on a very rusty 200.
 
sound like its identical to mine. ive got a rust hole about the size of a ciggy rizzla papers pkt, on the left hand side.
gonna get a small patch welded in.
 
You must log in or register to reply here.

Similar threads

B
Rear bumper choices
Replies
5
Views
405
BigJessie
B
M
Disco 2 Noise from rear when coasting
2 3
Replies
49
Views
3K
Stanleysteamer
Stanleysteamer
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
1K
sv_dOnut
S
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
745
tottot
tottot
N
Rear diff issues
Replies
5
Views
737
niko-h
N
Back
Top