paddocks1967
New Member
- Posts
- 341
- Location
- the sunny sooside,glasgow
hi guys,all doors open bar rear door, cant even open from inside surely there must be a way to open it cheers pat
rear door not opening
- Thread starter paddocks1967
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wolf247
New Member
- Posts
- 64
- Location
- ebbw vale in south wales
if its the tail gate and the door not opening off the button i would say you will have to take the trim off inside to get to the catch
paddocks1967
New Member
- Posts
- 341
- Location
- the sunny sooside,glasgow
hi wolf,its not the tailgate,its the passengers rear door cheers pat
wolf247
New Member
- Posts
- 64
- Location
- ebbw vale in south wales
Hi there Paddocks i have had a look in the manual and on rave also on my own truck and i think you will still have to try and take the trim off which won't be easy without damage to it but can't see any other way is the door unlocking or is it staying locked when the others are unlocked
paddocks1967
New Member
- Posts
- 341
- Location
- the sunny sooside,glasgow
hi wolf , all other doors open and that door stays closed,had the panel off but cant see how to open door cheers pat
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
just have a look for the child lock see if you can knock it off from inside the door.
wolf247
New Member
- Posts
- 64
- Location
- ebbw vale in south wales
i have tryed to copy and paste this for you but cant get the pic to come up that go's with it
LATCH - REAR DOOR
Service repair no - 76.37.13/70
Remove
1.
LATCH - REAR DOOR
Service repair no - 76.37.13/70
Remove
1.
Remove window lift motor/control unit assembly.
See ELECTRICAL, Repair.
2.
2.
Release door lock remote control cable from clip
on window lift panel.
on window lift panel.
3.
Remove 2 studs securing latch to window lift
panel.
panel.
4.
Disconnect outer cable from abutment bracket.
5.
Release remote cable from latch.
6.
Release sill button link rod from latch. Remove
latch.
latch.
Refit
7.
7.
Lubricate new latch.
8.
Fit latch to sill button link rod.
9.
Fit remote control cable to latch.
10.
Fit latch to window lift panel, secure with 2
retaining studs.
