rear diff

paul · Sep 28, 2005

having trouble trying to top up my rear diff,the nut has siezed tight after fitting the rad have tried wd40,mole grips but the bugger aint moving, they are range rover diffs and the nut is on the left side if looking from exhaust end!!!
any advice please people!!:

slob · Sep 28, 2005

you could try some heat

paul · Sep 28, 2005

thanks mate , i will give it a go

Jimthelandyman · Sep 28, 2005

try using a big long breaker bar then whack it with a hammer but not too hard.

Grippa · Sep 28, 2005

Had the same problem with mine. Good fitting quality spanner (the nuts were already a bit rounded) & a length of steel pipe for extra leverage. I found short jolts or thumps were better than constant pressure.

rear diff

paul

New Member

slob

Well-Known Member

paul

New Member

Jimthelandyman

New Member

Grippa

New Member

Similar threads