Rear Crossmember Refurbishment

lucifus · Oct 30, 2018

G-P said:
Really good to be fair, I am planning on having the full underneath of the 90 done by CSK as I don’t really fancy that job.

I took my old 110 to csk. They sprayed over my muddy chassis. I had to take it back to get them to address it. Google will help you find other examples of people with the same complaint.

Al2O3 · Oct 30, 2018

lucifus said:
I took my old 110 to csk. They sprayed over my muddy chassis. I had to take it back to get them to address it. Google will help you find other examples of people with the same complaint.

Good advice

Hard-Drive · Oct 31, 2018

OP, how many cans did you need to do the job? Was one enough?

G-P · Nov 7, 2018

Hard-Drive said:
OP, how many cans did you need to do the job? Was one enough?

One of each was enough, hopefully I should get the towbar and braces done as well with them.

G-P · Nov 7, 2018

Al2O3 said:
Good advice

Thanks for the heads up! Any recommendations? Is going to Foley today for a service so I will see if they will do it as well.

Scooby22 · Nov 7, 2018

lucifus said:
I took my old 110 to csk. They sprayed over my muddy chassis. I had to take it back to get them to address it. Google will help you find other examples of people with the same complaint.

Take a look at this job by a so called professional.

G-P · Nov 7, 2018

Wow that’s shocking, maybe I will take the time and do it myself, then at least I know it’s done properly.

gymmaniac · Nov 7, 2018

Al2O3 said:
Good advice

same, did a crap job respraying my rear cross member. Applying the dinitrol they did ok getting it everywhere, they just slapped it on top of the old stuff though. a month later I find an outrigger I can push a finger through - they never mentioned it. I wouldn't go back.

flat · Nov 7, 2018

Al2O3 said:
Well, in that first picture that's the best looking rear cross member in need of refurbishment that I've ever seen.

Exactly what I thought lol - refurbishment to me means rust you can poke holes in with your fingers!!

G-P · Nov 7, 2018

Been there, done that, bought a newer one!

Discodevon · Nov 8, 2018

G-P said:
Been there, done that, bought a newer one!

Hi did you have any trouble taking the hex screws out above the rear crossmember? And are they all the same size?

discomania · Nov 9, 2018

Scooby22 said:
Take a look at this job by a so called professional.

Yeah, Mike was really annoyed with this. Waste of his time and money. Makes you wonder, all the guy had to do was stand and blast media at a piece of metal and he got it wrong, the biggest insult was coating all the crud in black paint making the strip down even more difficult now.

neilly · Nov 9, 2018

discomania said:
Yeah, Mike was really annoyed with this.

Do you know this guy in the vid then?

Cheers

AdamD1 · Nov 9, 2018

I’ve had both mine done by csk, been happy both times. Really poor to paint over a muddy chassis though!

G-P · Nov 10, 2018

Discodevon said:
Hi did you have any trouble taking the hex screws out above the rear crossmember? And are they all the same size?

No came out fairly easily with a little WD-40, then replaced with some stainless ones.

Rear Crossmember Refurbishment

lucifus

Active Member

Al2O3

Well-Known Member

Hard-Drive

Active Member

G-P

Member

G-P

Member

Scooby22

Well-Known Member

G-P

Member

gymmaniac

Well-Known Member

flat

Well-Known Member

G-P

Member

Discodevon

Well-Known Member

discomania

Well-Known Member

neilly

Well-Known Member

AdamD1

Well-Known Member

G-P

Member

Similar threads