Disco 2 Rear Coil Spring removal help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

ClassikFan

Active Member
Posts
328
Location
Surrey
Trying to get old springs off to fit New ones but having undone shock & 2 spring retaining bolts I cannot lever the spring of the lug on the axles. I have ACE and was hoping to not have to undo those links.

Any ideas please?

Stuart
 
I did that a while ago and the long arm of the ACE anti-roll bar turned by about 30 degrees. It disconnected and reconnected the drop-link with one heck of a bang when I went round a corner. I ended up replacing the ACE anyway due to corrosion in the pipes and a knackered pump.

The best bet is to disconnect the top of both drop-links (16mm spanner and 18mm socket, I think) and then do as the Mad Hat Man says. Keep an eye on the brake-lines and ABS wire though; you don't want to try and stretch those. I found it easier to take the caliper off.
 
Are you putting taller/uprated springs on your car? I know that you can replace the springs without having to resort to spring compressors. I have just done it on my car.
 
HD springs, dimensions seem the same. I couldn't drop the axles enough to get the originals out.
I assume having ACE makes it harder and I didn't want to get into stripping brake scalpers off Tec so went down the compressor route.
 
Put compressors on old springs before any attempt at removal. Then they cannot expand as you increase the distance between chassis and axle.
 
ClassikFan said:
Pair of these ordered,
http://www.screwfix.com/search?search=Spring+compressor
Click to expand...

And pickup your free boot bag when you collect.
image.jpeg
 
You must log in or register to reply here.

Similar threads

C
Disco 2 Bobtail, TrayBack Suspension
Replies
0
Views
790
chu017
C
Sithmaull
Rumbling noise from front driving me crazy! help?? SOLVED
2
Replies
36
Views
4K
Sithmaull
Sithmaull
Tango91
  • Poll
Disco 2 Things I wish I knew when I took the body off (99 D2 TD5)
Replies
8
Views
3K
FlatbedPilot
FlatbedPilot
B
127 Rapier FFR unfinished project for sale
2
Replies
21
Views
4K
Beddo
B
P
Advice needed for fixing a VM 2.5
Replies
9
Views
2K
lynall
L
Back
Top