I lifted my Disco 2" just over a year ago and the only negative thing that has happened is the rear anti-roll bushes as shown here.
(Click on the pice to enlarge them)
My choices were to get rid of the bar as some others have done, or to sort the problem. I did not really want to remove the bar so I choose to fix it. I had read somewhere that you need to make 2" spacers to lower the bar.
Here is what I made.
2 bits of 2" steel box section 5" long drilled to suit the mounting on the chassis.
I fitted it all back with new polybushes, I also replaced the drop links as well as they had seen better days.
It took me just over 2 hours to do.
(Click on the pice to enlarge them)
My choices were to get rid of the bar as some others have done, or to sort the problem. I did not really want to remove the bar so I choose to fix it. I had read somewhere that you need to make 2" spacers to lower the bar.
Here is what I made.
2 bits of 2" steel box section 5" long drilled to suit the mounting on the chassis.
I fitted it all back with new polybushes, I also replaced the drop links as well as they had seen better days.
It took me just over 2 hours to do.
