Range Rover Classic Trialer.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Edward-TD5

Edward-TD5

Member
Posts
34
Location
Hampshire
Evening All,

I recently picked up an early range rover classic that has been turned into an off road trialer. It looks like an old build and sadly it was a two door originally. If only they knew at the time what it would be worth! She's got a 3.9 v8 with carb conversion. Sounds lovely.

Anyway, to the point!

I'm swapping out the rear axle for the d1 style with the shocks both on the front and not one either side as I'm sure the later style Is better for off roading. The original has pretty much rusted away (main reason I'm changing it) But it's standard height. I've got some 37" wheels I can put on it and a 4inch lift kit. Both laying around new old stock.

Question as its my first mainly off road only build, what else would it need?
I understand you can get spacers for the props now. Any ideas on size spacer needed for a 4" lift? Also do the trailing arms need to be modified in any way? Etc. I'm sure I will find out as I'm doing it but thought I would ask ahead of doing it all to save time. So I can order more bits if needed.

I will add a few pictures after this post so you can see it. Think it may have been built in the 80s looks like that style. But needs finishing.

Thank you in advance for any help or information.

Regards,

Ted
 
It came with the original 3.5 engine and manual box with overdrive as well.
 

Attachments

  • Screenshot_20211031-233239_Gallery.jpg
    Screenshot_20211031-233239_Gallery.jpg
    120.3 KB · Views: 144
That is/was a classic:eek:.

Oh well somebody else did it, you are just going to have fun with it so not going to hold that against you:).

Firstly I would say you wont need that OD, so that can be sold for some nice pennies for other goodies you may need:D.

Good luck with it and maybe consider starting a "project fred" :D.

J
 
marjon said:
That is/was a classic:eek:.

Oh well somebody else did it, you are just going to have fun with it so not going to hold that against you:).

Firstly I would say you wont need that OD, so that can be sold for some nice pennies for other goodies you may need:D.

Good luck with it and maybe consider starting a "project fred" :D.

J
Click to expand...
@hef19898 was after one don't know if he got one ,but it would have to be sent to Germany.;);):D
 
marjon said:
That is/was a classic:eek:.

Oh well somebody else did it, you are just going to have fun with it so not going to hold that against you:).

Firstly I would say you wont need that OD, so that can be sold for some nice pennies for other goodies you may need:D.

Good luck with it and maybe consider starting a "project fred" :D.

J
Click to expand...
I've just created a thread in the project section for it as well. Took a few days to get it running but it's running sweet as a nut now. Drives well too just needs a bit of TLC and a bit of love then she will make a nice little off roader
 
tomcat59alan said:
Rereading I don't know if I made it clear but it was an overdrive he was after.;)
Click to expand...
I did assume that is what you meant, it is up for grabs if someone does need it. Open to offers etc. It won't be much use to me being on an off roader. I may keep the 4 speed box just incase the auto breaks. But I can take the overdrive off no problem.
 
Edward-TD5 said:
Yes whoever did it originally certainly had a good go at it. I couldn't have brought myself to have done it. But I suppose when it was done they probably weren't worth anything.
Click to expand...
If you were proposing to do it, to a 2 door no less, I'd suggest we find you a padded room... But it's long done now, may as well have some fun with the thing! (The thing is also my suggestion for what you call it)
 
Longer brake lines?
Do you know of any metal work shops with a cnc plasma cutter ? They could possibly cut some prop-shaft spacers for you? Or mod your props length?..
 
Mark Piercy said:
Longer brake lines?
Do you know of any metal work shops with a cnc plasma cutter ? They could possibly cut some prop-shaft spacers for you? Or mod your props length?..
Click to expand...
I can do any mods it need to do at work. That's not a problem, just having one of those moments as it's been a while since my last build.
 
Ah, the rare Fairey OD! I actually found one last week... Now it is waiting to be shipped from my collegues place in the UK to me. Cost me an arm, so, and it was the cheapest one I found. If it is in good enough shape, 800 pounds sounds like a reasonable price to ask it seems. And that seems to be on the cheap end of things.

Edit: I need a new hood now, the old one decided to loose the lock on the highway last week and the new inner wings material was too soft to retain it... Not sure if having it straped down to the front bumper is acceptable in the long run!
 
You must log in or register to reply here.

Similar threads

M
Looking for A/C Wiring Diagram (1992-1994 Range Rover Classic)
Replies
0
Views
297
mikerrc1992
M
S
Classic Range Rover Number 10 of last 25
Replies
5
Views
729
Steve060724
S
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
V
Japanese range rover
Replies
3
Views
539
pwood999
pwood999
A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
Back
Top