peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
as title need clutch pedal assembly for range rover classic, 200tdi and change to manual gearbox, or is the disco clutch pedal assembly compattable ?
range rover classic clutch pedal assembly
- Thread starter peter8315
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 356
- Location
- Aberystwyth Mid Wales
Don't think the Disco one is the same. Have a look here at the part no's http://www.allbrit.de You can read it in English!
peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
thanks Rich, that is very interesting, ill keep that link, regards, Pete
EeEk
Well-Known Member
- Posts
- 681
- Location
- Elgin, Scotland
I have a 71 classic and a disco brake/clutch bracket thingy is not a direct swap.
It can be made to fit though
I swapped mine because my servo was a bit iffy and had a breaking disco. The 4 top bolt holes fit, the bottom, some line up but the bottom of the bracket/plate is different. I cut about 1" off the disco one and welded on the 1" cut off the rangie one. also had to chop a bit off the steering colum mount to miss brake pedal parts. Worth all the work as I now have a disco servo/master cylinder and the rangie brakes are 3 time better than they were
It can be made to fit though
I swapped mine because my servo was a bit iffy and had a breaking disco. The 4 top bolt holes fit, the bottom, some line up but the bottom of the bracket/plate is different. I cut about 1" off the disco one and welded on the 1" cut off the rangie one. also had to chop a bit off the steering colum mount to miss brake pedal parts. Worth all the work as I now have a disco servo/master cylinder and the rangie brakes are 3 time better than they were
peter8315
Active Member
- Posts
- 724
- Location
- Ilkeston, derbyshire
Thanks EeEK, i think if your determined you can move a mountain, i have managed to get one off an ebay breaker off a classic rangie, did you find that the rear prop fits back ok ie is the 5speed disco manual box the same length as the auto box?
EeEk
Well-Known Member
- Posts
- 681
- Location
- Elgin, Scotland
dont know about that....
Mine went from 3.5 with 4 speed manual to 3.9 auto
I guess I changed the prop at the same time but cant remember.Still have the clutch pedal though it just sits on the floor. It might go 300tdi yet so I left the pedal just incase.
