Range rover 2.7td v6 oil seal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sean12345

Sean12345

Member
Posts
21
Location
West midlands
Hello you good folks ,i brought a 2005 2.7td v6 range rover with a major oil leak thought id take a gamble lol,anyway i started to strip engine down as the oil leak was very bad and found the cam belt an pullies look like new and so does the oil pump which looks like its been changed to the upgraded 1 , anyway after removing crank bolt the pulley came off easy only to find the oil seal about a 1" from the oil pump sitting place ,question is should the seal have been locktighted in ?
 
20210924_165521.jpg
Picture of the position of oil seal once i removed pulley
 
Last edited:
Some seals need a quick wipe of grease on the lip to stop it being damaged on the first rotation.
Some new seals come with a touch of grease already coated on the lip. I'd maybe loctite it around the outside incase the oil pump opening isn't quite exact the size it should be... As we all know some parts aren't worth the box they come in..
 
Mark Piercy said:
Some seals need a quick wipe of grease on the lip to stop it being damaged on the first rotation.
Some new seals come with a touch of grease already coated on the lip. I'd maybe loctite it around the outside incase the oil pump opening isn't quite exact the size it should be... As we all know some parts aren't worth the box they come in..
Click to expand...

These seals must be installed dry, any oil/grease screws the seal up.
 
Mark Piercy said:
Some seals need a quick wipe of grease on the lip to stop it being damaged on the first rotation.
Some new seals come with a touch of grease already coated on the lip. I'd maybe loctite it around the outside incase the oil pump opening isn't quite exact the size it should be... As we all know some parts aren't worth the box they come in..
Click to expand...
Hi All, I wanted to add to Mark’s comment about the Loctite on the outside edge. Make sure it’s fitted straight as it could be very difficult to remove again if it leaks. Use a retaining product not a studlock grade as they cure slower and deliver a more durable seal.
Good luck, Tricky.
 
Sean12345 said:
Genuine LR seal used and new cam belt etc now its all back together and running perfectly no leaks well happy here. just need to sort the hot air in cabin as coolant was drained and its a bit late in the evening so sort that tomorrow
Click to expand...
Just be sure those three little waterpump bolts weren't /aren't over tightened!! o_O
 
You must log in or register to reply here.

Similar threads

Chris1993
Sport Range Rover oil leak
Replies
2
Views
845
Graculus
Graculus
Graculus
L405 Engine oil leak / fumes in cabin
Replies
10
Views
2K
marjon
marjon
P
Mot and oil leaks
Replies
8
Views
1K
paul griggs
P
Sean12345
Oil seal
Replies
1
Views
449
Sean12345
Sean12345
feyniriel
P38 axle seal mystery leak
Replies
9
Views
1K
Mark Piercy
Mark Piercy
Back
Top