Freelander 1 Radio wiring

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You’ll need the radio display/clock and the wiring to/from it and the connector depends on the existing headunit fitted

Have to ask why you’d want to go down this route?
 
The current head unit is an aftermarket one.
I want an LR one and just for impractical nostalgic reasons thought I'd get one like my '99 had, although that had a CD changer as well.
I'll whip it out and take some photos.
And then I'll look at the stereo...:p
 
This is with the head unit out.
Someone has added an additional earth and a live output, although that wasn't connected to anything..
How much of what's left do I need? Does that big block come apart? (Can't figure out how)
 

Attachments

  • IMG_1882.JPG
    IMG_1882.JPG
    370.6 KB · Views: 196
I might have a standard FL1 radio in storage. I'll take a look, later in the weekend, if it helps?
 
That’s a Quadlock connector and the outer part of the connector slides to release the two sections

The standard radio at that age (and connector) was known as C42
 
I might have a standard FL1 radio in storage. I'll take a look, later in the weekend, if it helps?
Thanks that would be helpful, if not too inconvenient!
That’s a Quadlock connector and the outer part of the connector slides to release the two sections

The standard radio at that age (and connector) was known as C42
Thanks - yes I managed to slide part of it sideways but wasn't sure what it did. I'll see what I can pull out :)
 
OP if Nodge can't find his I have one as attached.

Happy to send it to a good home.

Fritz

IMG_20190423_134908.jpg IMG_20190423_134932.jpg IMG_20190423_134908.jpg

EDIT: forgot to says, it's out of an 02 GS (3 Door)
 
That's lucky, as it appears I got rid of a lot of Freelander stuff a while back, an early FL1 HU with it. :(I have a CD changer, which I think might be FL1 though.
I hadn't thought of a CD changer. I see that the Alpine units they used were £700 though :eek:
How much were you thinking for yours?
 
I see that the Alpine units they used were £700 though
The multi changer was always expensive, even second hand they're expensive.
How much were you thinking for yours?
You can have it, but you need to make sure it's the correct one for your HU, as I believe there are a couple of models. And you'll need the wiring to go with it, as I don't think I have that.
If you can find out what model multi-changer you need, I'll check I've got it.
 
The multi changer was always expensive, even second hand they're expensive.
You can have it, but you need to make sure it's the correct one for your HU, as I believe there are a couple of models. And you'll need the wiring to go with it, as I don't think I have that.
If you can find out what model multi-changer you need, I'll check I've got it.
This one is the "C42" changer - I'm hoping that means it works with the C42 radio - no necessarilly true I realise.
[edit]
It also looks like you can get the wiring for between £35-£45 depending on supplier and model.
Or maybe a breakers might be a better bet for that.
[/edit]
 
This one is the "C42" changer - I'm hoping that means it works with the C42 radio - no necessarilly true I realise

Ok. I'll check what I've got. Hopefully I'll have what you need. I think I've got 3 or 4 multi-changers in storage, but no idea what vehicles they came out of now.;)
 
Back
Top