Radiator panel S3

John S · May 19, 2016

Does anyone know who supplies the steel support panel that the radiator and front wings attach? Mines corroded at the bottom. Thanks.

tottot · May 19, 2016

If it's the usual corrosion along the bottom two/three inch's have a welder put in a new section.Straight forward job.

chris7 · May 19, 2016

John....you cant buy a lower repair section...it has to be fabricated...I did mine as I too had serious corrosion....the trouble is that most of these on donor Landy are going to be in similar condition....its what I found..hence the repair.......Chris

John S · May 19, 2016

Thanks. Where could I buy a repair section.

honolulujoe · May 19, 2016

http://www.bits4landys.co.uk/s3_parts.htm

bottom repair section in list

I an sure I have seen a full remanufactured panel somewhere, been looking, can't see it though

dominicbeesley · May 19, 2016

I don't think you can buy a repair section. I just used a bit of angle iron and filled the rest with scraps and weld. It's held up ok so far. And my welding is pretty poor!

dominicbeesley · May 19, 2016

Joe, I'm not sure that's the bit he means if you mean 330443, that's a splash panel underneath the wing.

Here's some pictures of my fixing attempt https://www.landyzone.co.uk/land-rover/radiator-panel-needed.223316/#post-2585990

D

tottot · May 19, 2016

It is just an L shaped bit of steel.Done a few myself,can be done flush if as original wanted or with overlap if you just want it fixed.Front valance covers it anyway.

honolulujoe · May 19, 2016

dominicbeesley said:
Joe, I'm not sure that's the bit he means if you mean 330443, that's a splash panel underneath the wing.

Here's some pictures of my fixing attempt https://www.landyzone.co.uk/land-rover/radiator-panel-needed.223316/#post-2585990

D

oh, me talking bollox again

John S · May 19, 2016

Correct its part number 347955, not curved cover that sits in front. I like the idea of just welding it's only the strip along the bottom. Thanks guys.

Land Raver · May 19, 2016

Ashtree Land Rover will do a refurb and galvanise it but not cheap at £175

mistericeman · May 19, 2016

Have a word with Liz and her hubby Tony on here .....

https://www.facebook.com/groups/leafersatthepit/search/?query=liz wood

They will supply AND post either standard depth OR a deeper section repair section ....very reasonably priced AND fantastic Kwality ...

Radiator panel S3

John S

Well-Known Member

tottot

Well-Known Member

chris7

Well-Known Member

John S

Well-Known Member

honolulujoe

Well-Known Member

dominicbeesley

Well-Known Member

dominicbeesley

Well-Known Member

tottot

Well-Known Member

honolulujoe

Well-Known Member

John S

Well-Known Member

Land Raver

Well-Known Member

mistericeman

Active Member

Similar threads