Disco 2 radiator / intercooler removal

mikeadams1985 · May 19, 2016

has anyone got a decent guide on removal of these?
cant see what im missing as to why the rad wont come out, seems the intercooler is stopping it...and cant figure that out!!!

checked the workshop manual cant find it in there, no youtube help and nothing really else i can find online.
even a picture just pointing to X amount of bolts would help

Landmark2 · May 20, 2016

Hi, Here's a write up on the intercooler. http://www.discovery2.co.uk/intercooler.html
HTH,
Griff

Headtester · May 20, 2016

mikeadams1985 said:
has anyone got a decent guide on removal of these?
cant see what im missing as to why the rad wont come out, seems the intercooler is stopping it...and cant figure that out!!!

checked the workshop manual cant find it in there, no youtube help and nothing really else i can find online.
even a picture just pointing to X amount of bolts would help

Hi Mike. You need to remove the intercooler to remove the radiator. Have you got a copy of Rave? I did mine using that and it wasn't too bad to do. The pipe in the photo of your other thread looked more like a power steering or air con pipe, if I recall correctly the pipes on the rad and intercooler are rubber and don't have metal unions. You might like to invest in a pair of these pliers to get the pipe clips undone if you haven't already got a pair.

MrIFan · May 20, 2016

If you don't have air con it is easier to leave the intercooler attached to the rad. Disconnect both the intercooler hoses at the intercooler end and remove the i/c to egr one completely. Disconnect top and bottom rad hoses. Front grill off (indicators and under headlamp trims first), both horns off and the rad mounting bolts are accessible, one on each side. Now carefully lean the rad toward engine until i/c is clear then lift rad and i/c out together until you can access the two small lower hoses, an extra pair of hands makes things easier here but it is possible on your own. The book says remove the viscous fan first but there is just clearance with it in place.

mikeadams1985 · May 20, 2016

Headtester said:
Hi Mike. You need to remove the intercooler to remove the radiator. Have you got a copy of Rave? I did mine using that and it wasn't too bad to do. The pipe in the photo of your other thread looked more like a power steering or air con pipe, if I recall correctly the pipes on the rad and intercooler are rubber and don't have metal unions. You might like to invest in a pair of these pliers to get the pipe clips undone if you haven't already got a pair.

from what i can tell...whatever those metal unions are connected to..thats fixed to the radiator.

Intercooler is out and free, no probs. Its the other pipes on the rads i cant get out.

mikeadams1985 · May 20, 2016

right,,so its the gearbox oil cooler that appears fixed to the radiator..any idea how to separate them? can leave the gearbox cooler in, just want the rad out

Headtester · May 20, 2016

Is a gear box cooler only fitted to autos? Mine's manual and I don't think I have a gear box cooler

Disco 2 radiator / intercooler removal

mikeadams1985

Active Member

Landmark2

Well-Known Member

Headtester

Active Member

MrIFan

Active Member

mikeadams1985

Active Member

mikeadams1985

Active Member

Headtester

Active Member

Similar threads