Hi. I'm trying to put 94 disco r380 into my 1995 defender 90. The hole in the selector shaft isint in the right place for the screw on the quadrant of the defender stick. Is there anyway around this? Is the selector shaft in a disco gearbox different from a defender selector shaft? Any information on this would be greatly appreciated thanks
R380 gearbox
- Thread starter Mike1985
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chris07
Active Member
- Posts
- 413
- Location
- musselburgh the honest toun
yes they are different
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
the gearbox wont fit stick sits in a different place ,however dr evil did mod one to fit do a search
- Posts
- 7,877
- Location
- East Midlands
Yes, but somewhere among Dr Evil's tens of thousands of posts is a picture of a little adaptor socket that enables you to do this. If you've got access to a lathe it should be possible to make one.
if the thing your thinking of is the thing im thinking of im sure some one posted a link to were you can buy them
wangie46
Active Member
- Posts
- 963
- Location
- Lakeside Essex
You'll be needing one of these if you can't make one yourself Ashcroft Transmissions
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
i often use an r380 for either disco or defender it is only selector shaft and quadrant/yoke that needs changing ,but means a strip down to change
- Posts
- 7,877
- Location
- East Midlands
Ah, that's it. I wish they wouldn't write 'yolk' when they mean 'yoke'. You'd think at Ashcroft prices somebody could be bothered to read it before uploading it to the web.
