Disco 4 (LR4) Putting engine in Neutral

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

micknkazzyfonce

Active Member
Posts
87
Location
Cleethorpess
Good Morning Everyone.
2013 Discovery 4 sdv6 3.0L Diesel.
Can anybody tell me how to put the engine in neutral without the engine running to enable manual turning of the crankshaft.
It is to align camshaft pulleys for timing pins, also the two revolutions to confirm final timing alignment.
Really struggling to find anything in the workshop manual other than "now turn the crankshaft"

Help would be greatly appreciated.
Mick
 
Last edited:
mick, people dont understand the question!!, as for myself unles you have selected a gear its in neutral, and you should be able to turn it over,you will have resistance due to all the parts moving and piston rings etc
 
fostythor, many thanks for your reply, I really appreciate the time you fella's give to us non mechanic's ; apologies if it didn't come across clearly. I was thinking that when the engine is turned off, the car goes into park and everything is locked even without the parking break being "on".
So when parked and with the key being inside the car, the crankshaft can be rotated with only compression to overcome. My plan is to change the belts on Monday, but that huge doubt came into my head.
Regards. Mick
 
kermit_rr said:
Read up on emergency park release, i think that covers selecting transfer neutral for towing purposes
Click to expand...
Hi kermit, I can't see anything specific in the owners book other than if the engine is turned off while in neutral, after 10min it automatically shifts to park, and car's with a rotary selector go to park when turned off, & cannot be towed on 4wheels "seek qualified help". Is the "emergency park release" in the workshop manual ?
Thanks. Mick
 
kermit_rr said:
Easy to over think sometimes!
It can't be towed on 4 wheels without selecting transfer neutral because the wheels are still connected to the gearbox.
Click to expand...
Transfer neutral........thats a bit too technical for me, life was so easy when I had my Sunbeam Rapier, then 2.0Ltr Cortina's in the 70's & 80's.
Ready to change the 2 x front belt's on the D4 next week and am building to the HPFP, and looking forward to doing it. Thanks very much for your clarification.
 
It should be in the owners manual, Ours 2011 L322 is under the cup holders next to the rotary knob.
1 pull cord to release the EPB and a nut to turn to select neutral in the transmission.

Wouldn't imagine its changed much.

J
 
marjon said:
It should be in the owners manual, Ours 2011 L322 is under the cup holders next to the rotary knob.
1 pull cord to release the EPB and a nut to turn to select neutral in the transmission.

Wouldn't imagine its changed much.

J
Click to expand...
Hi marjon, I don't understand why the parking brake should have to be engaged or not if the car can't go anywhere, i.e wheels chocked.
Ours is the L319 & I can't see anything referring to going into transmission neutral, I think trying to turn the crankshaft before anything else might give me a "go ahead or not". Thanks for replying. Mick
 
micknkazzyfonce said:
Hi marjon, I don't understand why the parking brake should have to be engaged or not if the car can't go anywhere, i.e wheels chocked.
Ours is the L319 & I can't see anything referring to going into transmission neutral, I think trying to turn the crankshaft before anything else might give me a "go ahead or not". Thanks for replying. Mick
Click to expand...

I was just trying to explain where your emergency release mech would likely be. If you needed to tow or put the car on a trailer.
so worth further investigation under your cup holders later:).

For what you are doing you should not need either as was said earlier, The engine should turn with a socket on the main pully:).

J
 
marjon said:
I was just trying to explain where your emergency release mech would likely be. If you needed to tow or put the car on a trailer.
so worth further investigation under your cup holders later:).

For what you are doing you should not need either as was said earlier, The engine should turn with a socket on the main pully:).

J
Click to expand...
Thank you so much, from my first question and the great reply, I have much more confidence regards turning the crankshaft, this forum is just so informative. Hopefully I'm about to save myself quite a few quid.
Many thanks. Mick
 
Worst comes to the worst, jack a wheel up in the air or drop a propshaft or two. But i doubt it'll come to that. ;)

EDIT: Thought I was half jokin here!:eek::rolleyes::rolleyes::rolleyes:
 
Last edited:
IMO the gist is as shown in the workshop procedure to support the vehicle on axle stands as the wheels to be free and dont apply the parking brake before you disconnect the battery
 
sierrafery said:
IMO the gist is as shown in the workshop procedure to support the vehicle on axle stands as the wheels to be free and dont apply the parking brake before you disconnect the battery
Click to expand...
Good Morning Sierrafery, I have been going straight to "Timing Belt" and not "Starter Motor", absolutely straightforward, "Lift and Support the Vehicle" c/w a warning Red Triangle.
Thanks very much for reply, now I can crack on in the morning.
Regards Mick
 
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
362
xDParis64
xDParis64
M
2013 Discovery 4 sdv6 Oil Pump Housing
Replies
3
Views
1K
micknkazzyfonce
M
Pillar
Disco 3 (LR3) D3 OIL PUMP AND TIMING BELT CHANGE - IT WASN’T WHAT WE EXPECTED.
Replies
0
Views
2K
Pillar
Pillar
P
2.25 Diesel - Unknown issue
Replies
2
Views
2K
steve2286w
steve2286w
B
Freelander 1 Misfiring when hot.
Replies
0
Views
463
Buttonman
B
Back
Top