prop sorted

geordielad · Sep 2, 2011

prop now reconed new bearings cv boot & ujs
cv boot vame from dave mac propshafts £16 + p&p (google)
no banging or vibrations now
ujs have grease nipples you will need the long ones to get the grease in then put short ones to stop fouling prop

Hippo · Sep 3, 2011

ooooooo is the rubber/metal thing the thing that goes on this to fix it?

imgur

geordielad · Sep 4, 2011

yes its not a straight forward fit as you have to make the six holes slightly bigger but its a lot better than trying to fit a normal cv boot

Hippo · Sep 4, 2011

Thanks for the info. When looking at the joint on mine I see there’s what looks like 3 metal onions at the end of the prop shaft, inside the collar. Will the rubber easily stretch over this or is there a trick to it?

geordielad · Sep 4, 2011

take the circlip off the end and the three prong bearing will slide off

Hippo · Jan 9, 2012

I've got one of these boot replacement things now. Not fitted it yet. But I do have an update on the price.

£34 + vat = £40.80 (+ post).

Hippo · Jan 29, 2012

Update. Fitted me new prop boot today. This new £40.80 one fitted without the need for cutting. Must be a different one to the one before.

DSCN2180 Z9Mtk4m

ballyligboy · Jan 5, 2013

I appear to have f**ked up my gaiter today while bringing it back from the mechanics in my trailer. Got back and there was a thick black oil oozing out of the gaiter through a hole. Are these new gaiters easily fitted and the oil easily replaced?

ballyligboy · Jan 5, 2013

I see landrovercity are doing replacement gaiters - Land Rover Freelander 1 Front Propshaft Gaiter / Gaitor - LandRoverCity

Hippo · Jan 6, 2013

There's 2 types. The crap original one which rips oft as soon as you fit it and the betterer one we prefer to fit. Best of luck choosing.

ballyligboy · Jan 6, 2013

hey ho hippo, did you put oil or grease into the joint? does the joint come apart and go back together easy enuff?

Hippo · Jan 6, 2013

This is from memory as its been a while since I did it.

Disconnect the front prop to ird connection.

Remove all the bolts and slide the collar off.

DSCN2179 Fa03Kaz

Remove the cir-clip off the end of the joint. You dont need to remove the rollers. Be careful not to knock one off like I did. Hence the tie wrap to hold the needle bearings in place while I put the roller back.

DSCN2184 WMM2cXM

Should come off like this

DSCN2178 kctOEX66

Pull the old clip/gaiter oft.

DSCN2176 spaxYUY

Make sure the new gaiter fits over the collar and holes align.

DSCN2180 Z9Mtk4m

Now slide only the new gaiter and hose clip on the shaft. Fill with grease supplied with gaiter and fit the tripod joint carefully. Fit the cir-clip on the end of the shaft.

DSCN2184 WMM2cXM

Put some grease in the collar and slide onto the joint. Line up the collar and gaiter holes and secure with a tie wrap.

DSCN2185 6EUfruF

Secure back to ird.
Tighten the hose clip round the shaft holding the end of the gaiter making sure the rubber isnt pulled when the prop turns.

ballyligboy · Jan 7, 2013

super! thanks!

Firemannotsam · Mar 13, 2013

Just used this guide - thanks

marcustheanimal · Oct 24, 2014

Hey there, thanks for this guide, having problems getting the tripod joint off, circlip is removed, but it wont budge. Any tips please??

indie01 · Oct 25, 2014

Do you know what size the bolts are that hold the prop bearing housing to the underside of the car
Thanks

jamesmartin · Oct 25, 2014

m8x25mm with a 10mm head iirc, if you spit a cv its best to put it back with the rollers in same race they were running in

Bolt208 · Jun 20, 2016

Hippo said:
This is from memory as its been a while since I did it.

Disconnect the front prop to ird connection.

Remove all the bolts and slide the collar off.

Remove the cir-clip off the end of the joint. You dont need to remove the rollers. Be careful not to knock one off like I did. Hence the tie wrap to hold the needle bearings in place while I put the roller back.

Should come off like this

Pull the old clip/gaiter oft.

Make sure the new gaiter fits over the collar and holes align.

Now slide only the new gaiter and hose clip on the shaft. Fill with grease supplied with gaiter and fit the tripod joint carefully. Fit the cir-clip on the end of the shaft.

Put some grease in the collar and slide onto the joint. Line up the collar and gaiter holes and secure with a tie wrap.

Secure back to ird.
Tighten the hose clip round the shaft holding the end of the gaiter making sure the rubber isnt pulled when the prop turns.

Hi, my gaiter broke and I have been searching for a similar gaiter online but I can seem to locate one similar to the one on pic,
Please advice where i can get one.

Regards

DCUNNINGHAM · Jun 26, 2017

Can't seem to move tripod bearing
Any ideas

MollyNomad · Jun 29, 2017

DCUNNINGHAM said:
Can't seem to move tripod bearing
Any ideas

I you can remove remove circlip you may have to take slightly stronger measures to dislodge the tripod bearing. On other cars I have had to resort to using two bits of wood to tap into bearing(usually place below either side of the shaft and using a downward motion on the shaft until the bearing make contact. Repeat until freed. My only caveat would be that, a seen from previous photos if one of the balls come off then it may end up with roller needle bearing hell a they make a bid for freedom. Other than that technique I can't see another option. Maybe others others to beg differ. Best of luck.

prop sorted

Active Member

Lord Hippo

Active Member

Lord Hippo

Active Member

Lord Hippo

Lord Hippo

Member

Member

Lord Hippo

Member

Lord Hippo

Member

New Member

Member

New Member

Well-Known Member

New Member

Active Member

Well-Known Member

Similar threads