prop help please

kevsj · Apr 19, 2012

hi there im getting a bit confused as how my props should be,

pic 1 , iv found the arrow on the long shaft, not that it means much to me because i dont have any idea what to match it up with, i did find a spot on the short end

pic 2 is how i thought they went yokes in line, but always seem to be tooth out

pic 3 is opposite

im really lost off so any help would be great

elsie · Apr 19, 2012

Why did you take the prop apart ??

The Mad Hat Man · Apr 19, 2012

have yu asked on difflock?

kevsj · Apr 19, 2012

The Mad Hat Man said:
have yu asked on difflock?

i have as im after a quick fix

kevsj · Apr 19, 2012

elsie said:
Why did you take the prop apart ??

i took them off when fitting a new transfer box and decided to greese,clean the prop splines not looking at how they were and thinking they went back together ,yokes in line but now got bad vibration when driving

jamesmartin · Apr 19, 2012

rear prop should have both inner yokes (one at each end) in the same plane ,front 15-30 degrees out of ,front like this Google Image Result for http://www.island-4x4.co.uk/images/FRONT%2520PROPSHAFT%252083-94%2520FRC8390
rear like this Google Image Result for http://www.ekmpowershop2.com/ekmps/shops/challenger4x4/images/propshafts.jpg

kevsj · Apr 19, 2012

thanks for that, is there a way for working out the front prop,big help cheers

jamesmartin · Apr 19, 2012

front has spline to axle end rotate front 1 - 2 splines in front of staight like rear ,as default put front the same as rear

prop help please

kevsj

New Member

elsie

Well-Known Member

The Mad Hat Man

Well-Known Member

kevsj

New Member

kevsj

New Member

jamesmartin

Well-Known Member

kevsj

New Member

jamesmartin

Well-Known Member

Similar threads