Previous owner convo?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Troy81

Troy81

Active Member
Posts
261
Location
Swindon wiltshire
The previous owner mentioned he didn't have a locking wheel nut key. So now the time has come where I need to do a change. But after much confusion this is what I have Is this normal lugs or lockers ? :confused:

83FF0ADF-E24F-4225-BC42-85CC69074C99-1240-000002419DDA1232.jpg
 
They look like normal alloy wheel nuts.

Having said that however, locking wheel nuts originally came with little covers to go over them so that they match the rest of the set.

Best bet is just to try and crack them all off while the wheel is on the ground and see how you get on.
 
You have the standard LR wheel nuts for alloy wheels, the locking nut if you have one has a removeable dimpled cover and is the only nut that the cover is removeable.
27mm is the wheel brace /socket size I believe.
 

Attachments

  • S4200676.JPG
    S4200676.JPG
    138 KB · Views: 152
You must log in or register to reply here.

Similar threads

P
Disco 4 (LR4) Pipe in Engine bay - Should it be connected??
Replies
4
Views
527
lynall
L
bahteles
Disco 2 D2 Autobox P1884
Replies
7
Views
693
sierrafery
sierrafery
C
Disco td5 abs light
Replies
5
Views
926
Anaconda
A
A
Sporadic Won't start and No Cranking
2
Replies
22
Views
1K
ANR
A
G
Half shaft seals failing repeatedly Discovery 2
2
Replies
34
Views
4K
Anaconda
A
Back
Top