Power steering

C

ckc100

New Member

Posts

37

Location

Morayshire

• Nov 7, 2007

• #1

Folks,
Has anyone fitted power steering to a normal diesel series 3? or can it not be done?

 

S

Sean

Banned

Posts

19,268

Location

Orkney

• Nov 7, 2007

• #2

Series Land Rover Power Steering Kits to fit the standard 4cylinder engine or the Rover V8
Land Rover Series 2 2a 3 Power Steering conversion
Converting a series Land Rover to power steering

yes, it took me about 10 seconds to find that lot, how come you couldnt do the same ?

 

yella

New Member

Posts

15,991

Location

outside cos every fookers in me shed and theres no

• Nov 7, 2007

• #3

dont be picking on the newbies cockerknee

 

S

Sean

Banned

Posts

19,268

Location

Orkney

• Nov 7, 2007

• #4

i was gonna tell him to feck orf and do a search, but seeing as it wednesday i thought i'd be elpfull

 

Pikey

Dummy Ejection Facilitator..

Posts

47,185

Location

in Baron Wet Bum's Slave pit..

• Nov 7, 2007

• #5

Sean said:

i was gonna tell him to feck orf and do a search, but seeing as it wednesday i thought i'd be elpfull

Click to expand...

where are your facts to support the statement.

 

S

Sean

Banned

Posts

19,268

Location

Orkney

• Nov 7, 2007

• #6

redhand said:

where are your facts to support the statement.

Click to expand...

cos:

a - i didnt say "feck orf and do a search"
b - i provided im with 3 elpfull links

thems is the facts in my apple pies

 

P

plank22

New Member

Posts

12

• Nov 9, 2007

• #7

ckc100 said:

Folks,
Has anyone fitted power steering to a normal diesel series 3? or can it not be done?

Click to expand...

I got a series 3 with PAS (allthough it hasnt been run up!!!)..........

Mite be moving the goal posts a little as i have v8 and rangie axles but did get it all on by using a gas axe to remove all the old steering box and putting on rangie steering column and mounting the PAS box to the chassis at the front. To do that bit i also cut out the front X member and replaced it with box section! basicly i looked at how it was on a rangie and rebuilt it on my series with bottles and welder!!!!

 

C

ckc100

New Member

Posts

37

Location

Morayshire

• Nov 9, 2007

• #8

Thats more the style I like,
Sounds like a good way to do it to me.

 

P

plank22

New Member

Posts

12

• Nov 9, 2007

• #9

yeh i checked out them links that got put up and this one: Converting a series Land Rover to power steering prob gives the best idea. Slightly different that they yankee so obviously all the steering on the wrong side and the rangie PAS box sits inside the chassis, hence the removal of the front X member!