HasisD
Member
- Posts
- 89
- Location
- Bentham, N. Yorks
1) Okay, I've finally lost patience with my local garage. Been using them for 4 years now, but increasingly there has been a lack of attention to detail (e.g. steering wheel coming back badly off-centre after new steering box fitted). This has now got to the point where I took the Disco down to them last week with a severe PAS leak and all they did was replace the section of return pipe that had touched (they'd fitted that) the turbo piping with off the shelf pipe and two jubilees. Needless to say, that wasn't even the problem...which they would have seen if they'd spent 5secs looking beyond the pipe. So...last time I go to them, which is a shame.
2) So, looking at the problem hard myself (as I should have done previously), it's clear that the PS pump is leaking badly. Also the pipes to and from the S-Box are corroded to the point of weepage. Looking at Haynes I was chuffed to see that the PS pump replacement is a two spanner job, which I'm happy to tackle myself BUT, the question for you good folk is...what spanner rating is the S-pump to S-box pipe replacement?
Can I replace that piping without moving the radiator (which I dread), or is it straightforward once I've cleared the shields, battery and air box out of the way? I've now ordered the parts so any tips gratefully received.
3) This has all reminded me of the point of why I love Landies...what the point of having a mechano set if you don't play with it yourself. Sometimes, in the heat and pressure of life, I forget that.
2) So, looking at the problem hard myself (as I should have done previously), it's clear that the PS pump is leaking badly. Also the pipes to and from the S-Box are corroded to the point of weepage. Looking at Haynes I was chuffed to see that the PS pump replacement is a two spanner job, which I'm happy to tackle myself BUT, the question for you good folk is...what spanner rating is the S-pump to S-box pipe replacement?
Can I replace that piping without moving the radiator (which I dread), or is it straightforward once I've cleared the shields, battery and air box out of the way? I've now ordered the parts so any tips gratefully received.
3) This has all reminded me of the point of why I love Landies...what the point of having a mechano set if you don't play with it yourself. Sometimes, in the heat and pressure of life, I forget that.