Power steering box Pullman nut also steering wheel not straight

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

darrenm

Active Member
Posts
670
Location
Chorley Lancashire
Spent today changing my long leaking steering box which went ok I would like to replace the nut on the pitman arm but cannot find the part number I have put the old one back on for know but I'm not. 100 % Happy with it
Took it out for a test drive and the steering wheel is about 12% out what the easiest what to ajust this
 
nuts can be used many times as long as in good condtion ,did you fit locking washer ?, centralise steering box using pin up through drop arm rear up in to box or count turns lock to lock and set central , check were steering wheel is and correct if not central too,steering wheel and box are now both set correct to each other, then go for a drive again check steering wheel alignment and if wrong adjust drag link to correct
 
darrenm said:
I thought centred
Click to expand...

if steering wheel is central when box has pin it it adjust drag link, i drive the car note where steering wheel is when driving straight ,keep steering wheel in that position when car is stopped adjust drag link to center steering wheel then retest up the road and re-adjust if necessary ,then all 3 are in center position pas box steering wheel and road wheels
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Steering wheel noise when turning left and stationary-ish — changing PAS and hose did not fix
Replies
3
Views
680
MAF Diver
MAF Diver
T
Spongy(?) Steering
Replies
1
Views
255
tottot
tottot
F
Steering box alignment disco 2
2 3
Replies
42
Views
6K
Dervishi
Dervishi
F
Powersteering box advice
Replies
0
Views
670
Farmboy86
F
J
Discovery 2 PAS Problem (SOLVED)
Replies
11
Views
2K
JakeFrost
J
Back
Top