- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Best order some tape then. I can guess what will happen once I peel it back!
Plenum filter sponge dimensions
- Thread starter Grrrrrr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
You keeping the measurements to yourself? are they top secret.
I was going to try and draw it in paint or similar. It isn't square, it has a very slight V-shape.
I'll take a photo with my phone but it looks a bit messy!
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Especially for Alan.
From left to right it is 22" wide. The shape is actually like an arrow where the point is 1/2" above the horizontal. The sides are 4 3/4" long. There is a central cut out at the bottom which is 2" wide and 2 3/4" deep. That just leaves the 2 bottom edges @ 10" wide.
From left to right it is 22" wide. The shape is actually like an arrow where the point is 1/2" above the horizontal. The sides are 4 3/4" long. There is a central cut out at the bottom which is 2" wide and 2 3/4" deep. That just leaves the 2 bottom edges @ 10" wide.
- Posts
- 58,170
- Location
- Preston Lancs.
Especially for Alan.
From left to right it is 22" wide. The shape is actually like an arrow where the point is 1/2" above the horizontal. The sides are 4 3/4" long. There is a central cut out at the bottom which is 2" wide and 2 3/4" deep. That just leaves the 2 bottom edges @ 10" wide.
View attachment 72963
Can you convert that to Metric for the younger generation?
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
- Posts
- 58,170
- Location
- Preston Lancs.
67Rob
Active Member
- Posts
- 128
- Location
- Norf Lundahn.
Are there any problems if you don't fit the filter?
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Pollen filters fill with crap even quicker and the mice like it better.
67Rob
Active Member
- Posts
- 128
- Location
- Norf Lundahn.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
And at certain speeds you seem to get a harmonic that causes an awful noise. I hope that is what is causing it anyway. Will confirm once replaced.
All that dust and crap banging straight into the system cannot be good though.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Already done here: Intake plenum filter replacement (Range Rover 4.0/4.6/p38)
Anywhere I see the word plastic and clip on a 20 year old Land Rover my heart fills with dread!
I've bought some waterproof double-sided tape to stick the door trims back where they might come loose. The screws look pretty easy.
It is just those clips that worry me!
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
You may find a few rusty screws as well there was on mine.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Didn't fix the air-noise at a certain motorway speed.