Please help rust on rear passenger bottom wheel arch
- Thread starter Gus1989
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,609
Try and post a clear pic and someone will tell you.
So long as the surrounding steel is sound, I would say that little hole is irrelevant.
Obviously if you take it to halfords/quick fit you are in trouble!
discool
Well-Known Member
- Posts
- 13,609
Even though the hole is a break into a solid steel boxed construction that’s behind what we can see, supporting what ever, then owner will then be lucky if as u say “irrelevant”
- Posts
- 9,105
- Location
- Roaming the UK on assignments
That's just the start of it, the body mount is just behind that flappy panel at the bottom, they might pass it but I wouldn't want to let all that water in the interior. They might, they might not pass it but I very much doubt it.
Even though the hole is a break into a solid steel boxed construction that’s behind what we can see, supporting what ever, then owner will then be lucky if as u say “irrelevant”
I think a smear of sikaflex and a touch of black aerosol and that will be good to go.
discool
Well-Known Member
- Posts
- 13,609
Ho ho ho, you or I can do better than that.
1. cut a template from a cornflakes box, several attempts maybe required to get a good fit.
2. stick what u have made over the rusty area, use an environment friendly paste is best.
3. when dry, spray with under seal for the authentic appearance, an environment friendly under seal is best.
4. when dry, spray with muddy stuff.
Now get an MOT pass and the put the vehicle up for sale.
Sent from my iPad on a train
Ho ho ho, you or I can do better than that.
1. cut a template from a cornflakes box, several attempts maybe required to get a good fit.
2. stick what u have made over the rusty area, use an environment friendly paste is best.
3. when dry, spray with under seal for the authentic appearance, an environment friendly under seal is best.
4. when dry, spray with muddy stuff.
Now get an MOT pass and the put the vehicle up for sale.
Sent from my iPad on a train
Real cornflakes or lidl/aldi versions!
