Freelander 1 PCV Upgrade

MaxTheDog1 · Nov 17, 2022

Hi All,
In another thread (Whine,whine,whine) I’m getting that sorted. In the meantime I’m going to do the service - usual things, oil,air, fuel filters and fluids, oil, diff, gearbox. My question is rather than replace the crankcase breather with another, do the ‘upgrade’ to a supposedly fit ‘n’ forget separator.
Anyone done this and if so has it been all it promised?
Cheers,
Michael.

J_D · Nov 17, 2022

It's been reccomended to keep original filter and replace every couple of years, the theory is what it would filter gets put back into the engine. Easy to get too when also changing air filter.

MaxTheDog1 · Nov 17, 2022

Hi J_D,
Thanks, since putting the post up I’ve seen a thread via Google not the search function. That thread said the same as you. Won’t bother with ‘upgrade’ after all.
Cheers,
Michael.

Jayridium · Nov 17, 2022

I did the upgrade when it was the flavour of the month, now wondering should I buy new bits and revert to the original filter arrangement?

MaxTheDog1 · Nov 18, 2022

Cheers Jayridium,
I think there’s a consensus appearing here. Plus another thread I found elsewhere. I’ve ordered the white filter.

Nodge68 · Nov 18, 2022

MaxTheDog1 said:
Hi J_D,
Thanks, since putting the post up I’ve seen a thread via Google not the search function. That thread said the same as you. Won’t bother with ‘upgrade’ after all.
Cheers,
Michael.

This upgrade wasn't anything to do with improving the engine, it wasn't even an LR thing.
BMW introduced this on their own vehicles to reduce service times in the workshops. It also addressed many issues of oil blowing out the dipstick, where the original filter change was missed.
By installing the cyclonic separator, there's no need to replace the fluffy filter at the same time as the oil filter, however more oil gets into the intake as a result, which simply clogs the intake manifold faster, if the EGR is still functioning.
Oil loss also increases with the cyclonic separator, when compared to the fluffy filter.

MaxTheDog1 · Nov 18, 2022

Thanks Nodge,
The gear arrived this morning so that’s time at the weekend spoken for(weather permitting!).

MaxTheDog1 · Nov 18, 2022

Any recommendations for engine oil, before I go and get some. The last time I did my own servicing was in the late 80’s….!!

Nodge68 · Nov 18, 2022

MaxTheDog1 said:
Any recommendations for engine oil, before I go and get some. The last time I did my own servicing was in the late 80’s….!!

I used a full synthetic 5w40 to ACEA A3/B3 specification.

Freelander 1 PCV Upgrade

MaxTheDog1

Active Member

J_D

Well-Known Member

MaxTheDog1

Active Member

Jayridium

Well-Known Member

MaxTheDog1

Active Member

Nodge68

Well-Known Member

MaxTheDog1

Active Member

MaxTheDog1

Active Member

Nodge68

Well-Known Member

Similar threads