Parts from a full disco

ashleywood.ash · Sep 6, 2016

I have the opportunity to buy a full disco 200tdi with 150k on clock. Still just in mot for £500.
Good buy?

I plan to get it for spares for my 200tdi converted 110.

What parts can I keep?
- engine and auxs
- gearbox and transfer
- axles

Marmaduke · Sep 6, 2016

Can't use the rear axle on a 110 as it's not rated for the weight

ashleywood.ash · Sep 6, 2016

Always found that odd as they use standard axle on disco and RR.

Guess it's to do with load carrying as all can tow same weight

Seffy · Sep 6, 2016

Transfer box will perhaps have wrong ratios in it too

Axles should be the same, it would be the springs not rated for the weight. I would have thought, simply because axles are unsprung weight.

Kwakerman · Sep 6, 2016

Seffy said:
Transfer box will perhaps have wrong ratios in it too

Axles should be the same, it would be the springs not rated for the weight. I would have thought, simply because axles are unsprung weight.

110 will have the stronger Salisbury axle rather than a Rover one.

IamRobbie · Sep 6, 2016

Good buy. Engine and auxs worth that axles might be 10 spline so nothing special unless ya run 10s I did the same and scrapped the body and chassis and kept the engine. Scrapped the lt77 box even and sold the transfer for 30 quid lol

Discokids · Sep 6, 2016

As said, rear axle no good for a 110, disco/rr/90 maximum authorised mass is much lower than 110 so standard axle is sufficient. Nothing at all to do with towing.

Parts from a full disco

ashleywood.ash

Active Member

Marmaduke

Well-Known Member

ashleywood.ash

Active Member

Seffy

Active Member

Kwakerman

Well-Known Member

IamRobbie

Well-Known Member

Discokids

Well-Known Member

Similar threads