- Posts
- 58,170
- Location
- Preston Lancs.
Main lines from block to bags and tank are 6 mm OD. Lines from block to drier and back are 8 mm OD. Diaphragm valve vent into loom is 4 mm OD.
P38A Part and pert number help
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Main lines from block to bags and tank are 6 mm OD. Lines from block to drier and back are 8 mm OD. Diaphragm valve vent into loom is 4 mm OD.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Dopey, somewhere like Activ-Air will have loads of it. When I went in they just handed me a load of it which was just off-cuts to them. Used in aerospace and trucks so there must be someone close to you.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 58,170
- Location
- Preston Lancs.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
There you go Dopey, use a hair dryer or GENTLE heat from a hot air gun.I made a former out of wood so that the pipe is held in shape while it cools. If you had told us what block in your first post I could have advised you and posted a photo but it's too dark and scary to go out to my garage now.
Attachments
- Posts
- 58,170
- Location
- Preston Lancs.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Ha ha, it was a one use jig and as you can see it took me hour's. Found it last week during my garage clearout or should I say redistribution.Does it have the T.C.A precision tools stamp on the other side?
- Posts
- 58,170
- Location
- Preston Lancs.
Ha ha, it was a one use jig and as you can see it took me hour's. Found it last week during my garage clearout or should I say redistribution.
If and when my garage ever gets a clear out redistribution Time Team will be needed.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Now I'm wondering if Dopey is allowed to use anything that produces heat i.e..matches, heat gun even a hair dryer.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
And the Antique Road show.If and when my garage ever gets a clear out redistribution Time Team will be needed.
- Posts
- 58,170
- Location
- Preston Lancs.
Now I'm wondering if Dopey is allowed to use anything that produces heat i.e..matches, heat gun even a hair dryer.
Possibly not, it must be included in the parole and discharge papers as a stipulation one would think.
- Posts
- 58,170
- Location
- Preston Lancs.
Yea I have someone down the road duz LGV's
Cheek of you, I can with adult supervisionPossibly not, it must be included in the parole and discharge papers as a stipulation one would think.
OK I am going to make the mold thing to shape the tube, got a pencil sharpener, ordered a pipe cutter (99p) will look at what size pipes I need, kept the link to the pipe to buy the right size.... im going to do this right!!!!!
Wife says she will supervise me with the hot stuff....
Wife says she will supervise me with the hot stuff....
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Yep the camel toe girl would be welcome.
Camel toe girl?
- Posts
- 58,170
- Location
- Preston Lancs.
Fiona Bruce.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Certaintly looks like she's been kicked by a camel.
kurtjohnson10
Well-Known Member
- Posts
- 15,235
- Location
- midlands
Or hit with an axe
Similar threads
Freelander 1
PG1 5th gear synchro spring
