Freelander 1 Parking Sensor Damage - Bot of Advice Please

So Friday night I managed to reverse into a low wall. No major damage but the parking sensors no longer work.

Here is a photo of the damage.



The sensor was actually hanging out so I pushed it back in. I think that may have been a mistake but it's done now.

So when I put the car into reverse I get the normal beep to let me know I'm in reverse then a long continuous beep (slightly different tone) after which no sound but the button by the driver seat is flashing. I get no clicking from any sensor after it's gone silent (or even before as far as I'm aware).

I'm assuming that it is just the sensor I have broken but what I'd really like to know is whether there is anything else in that area that is parking sensor related that I could have also damaged.

I've found a thread on here about drilling the sensor out rather than removing the bumper. Anyone had any joy with that route as it sounds like it might be a little prone to causing more damage to me?

Fritz

Mine started making a similar noise a couple of days......

in for a fix

So after doing some more digging the long tone I get is apparently telling me I have a faulty sensor (@pardec I obviously know which one but you may need to try this clicking sound thing to work which are faulty) but looking for a replacement I have a few options on part numbers.

So...anyone have a part number for an 04 SE nearside rear parking sensor?

Fritz

YDB500311LML SENSOR - PARKING AID SYSTEM, BLACK, OUTER, 90 º, REAR BUMPER


YDB500301PMA SENSOR - PARKING AID SYSTEM, BLACK, INNER, STRAIGHT, REAR BUMPER

Well I've ordered the sensor £ 15 so will see how I get on

fritz