Panhard rod

Hey all I have a disco td5 and I have an annoying issue!
I have 51 reg vin 2a
I have had a it lifted 2inch and recently had to have a new panhard rod as the threads stripped on the old 1(no idea how)
The old panhard was a terafirma tf254 as is the new one only difference according to them is the exterior finish.
I can not for the life of me get the new 1 into alignment the minimum length of the rod is 824mm and when the car is aligned according to there fitting instructions the best gap I can get is 815mm.
Is there anything that would cause this to be thrown off?
Visual inspection everything looks straight and correct.
Also the old 1 was fine on the car. Has anyone got pictures of the older zinc style tf254 with a 2inch lift ?

On a standard panhard rod there are no threads - do you mean the threads of the bolts ?

To fit the adjustable panhard rods you will need a ratchet strap or two!

thre word terrafirma gives away the problem.... aka terrra rubbish the build quality and contrilo is a joke, buy three off them each on will be a different size....

KISSMYAURA said:

thre word terrafirma gives away the problem.... aka terrra rubbish the build quality and contrilo is a joke, buy three off them each on will be a different size....

Click to expand...

"TerraChina"

Your chassis needs pulling accros to line it back up. Set the length to what the spec is quoted.