Painting Leaf springs.
- Thread starter Mseries3
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
right, nock them to bits and wire wheel them up, then grease between the leafs before assembly, then put them back together ,
wipe off the grease thats sperted out the sides then paint them with somethin flexable, like 2 coats of redoxide then a good chassis black etc,
wipe off the grease thats sperted out the sides then paint them with somethin flexable, like 2 coats of redoxide then a good chassis black etc,
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
before
after
after
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
parrats bollix ? yup, prime and paint , might benifit from a good etch primer first depending on the finish
Teflon
New Member
- Posts
- 683
Whose Are they?
The good'n's shouldn't need painting; bad n's from reports will have probavbly sagged before they've had a chance to rust!
Smoothrite has always been a favorite one for me; its very plastic, used it on dirt bikes for years, got a lot of give in it, and tends to work a bit like stone-chip, as in it doesn't.
The good'n's shouldn't need painting; bad n's from reports will have probavbly sagged before they've had a chance to rust!
Smoothrite has always been a favorite one for me; its very plastic, used it on dirt bikes for years, got a lot of give in it, and tends to work a bit like stone-chip, as in it doesn't.
British Spirings - I want to paint them for 2 reasons.
1. They have been sitting about for quite a while and a bit of paint has flaked and chiped off
2. I hate anything that looks blingy... and they are green
Just want them black so they don't look out of place.
1. They have been sitting about for quite a while and a bit of paint has flaked and chiped off
2. I hate anything that looks blingy... and they are green
Just want them black so they don't look out of place.
Teflon
New Member
- Posts
- 683
British Spirings - I want to paint them for 2 reasons.
1. They have been sitting about for quite a while and a bit of paint has flaked and chiped off
2. I hate anything that looks blingy... and they are green
Black Smoothrite! The Universal Coverall!
- Posts
- 83,282
- Location
- Embasinga stocæ
yeah - but yu dont get many wooden carts nowadays, CharlesY :bolt.
