Painting heat advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

Rorie

Active Member
Posts
641
I am away to spray the rear tub of my defender. I have a gazebo with sides to put the car in, but obviously need to heat it up.

I understand that propane burners add a lot of moisture to the air, so are not ideal for painting in, but ceramic heaters don't actually heat the air, just the item infront of them.

So, any thoughts on what the best type of heater would be for inside the gazebo but to keep the air dry?

Thanks
 
I use infra red lamps for drying paint (SMART repairs) & as you say, they heat the item not the air.
For dry heat you're looking at electrical - https://www.argos.co.uk/search/electric-heater/ - but the bills aren't going to be pleasant!
Bear in mind that anything involving movement of air is going to stir up dust & that will stick in the surface of the paint leaving a lot of fine sanding & polishing work on the final job to get rid of all the resulting nibs.
 
Its coach enamel paint i'm using. I probably wouldn't use it again, but I've done the rest of the car with it, so may as well continue!

I am thinking infra red lamps are probably best. I will just need to make sur the tent its self isn't too cold to start with I guess. Its a big space to heat with lots of opportunities for the heat to escape, so maybe large infrared lamps are better and just place them around the body work i'm painting (rear tub)?
 
Haha, that was the plan! But something happened and it's now winter! Need to get it finished so I can progress with the project
 
I'm in Scotland and it's 14 degrees at the moment, I've painted 2k in colder conditions than this with no problems but never with coach enamel so I'm out.
 
Rorie said:
Its coach enamel paint i'm using. I probably wouldn't use it again, but I've done the rest of the car with it, so may as well continue!

I am thinking infra red lamps are probably best. I will just need to make sur the tent its self isn't too cold to start with I guess. Its a big space to heat with lots of opportunities for the heat to escape, so maybe large infrared lamps are better and just place them around the body work i'm painting (rear tub)?
Click to expand...

You need to get the Technical Data Sheets for the paint you are using & follow the instructions therein.
 
You must log in or register to reply here.

Similar threads

G
Series three heater matrix blowing cold
Replies
11
Views
390
Citizen Kane
C
meego
Heater Flaps
Replies
1
Views
305
miktdish
miktdish
S
esoteric question about ignition
Replies
1
Views
382
boguing
boguing
M
TD5 Air Conditioning - But without the large dash assembly.
Replies
4
Views
1K
minimole23
M
Seph98
Turbo Hoses with oil
Replies
7
Views
766
miktdish
miktdish
Back
Top