satchmolips
Active Member
- Posts
- 424
- Location
- Worcestershire
Will be taking these off to renew headlamp bowls. Read somewhere about tarting them up with a plastic spray? Any recommendations?
Painting Headlight surrounds
- Thread starter satchmolips
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Landy-ads
Active Member
- Posts
- 407
- Location
- Out the front, spanner in hand
I roughed mine up with some wet n dry and sprayed them with normal cellulose primer and topcoat, they came up lovely. Peeps say it doesn't always last but they are so easy to take off and do again its not worth worrying about.
Yeeeeeeharrrr!
Yeeeeeeharrrr!
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
I've herd good stuff about plastikote although I've never used it myself, Id just crack the spray gun out and annoy the neighbours again 
richards123
New Member
- Posts
- 35
- Location
- Felixstowe, Suffolk
Tried that on mine but just went grey. Had also tried 'back to black' which seems to mean 'back a few shades of grey for a bit'
Think I just painted with some matt black halfrauds in the end.
ebbadger
Well-Known Member
- Posts
- 1,518
- Location
- Twickenham, Middlesex
plastikote... superb paint, does an excellent job
satin looks great on arches n lamp surrounds, gloss on metalwork, covers minor imperfections really well, touch dry in minutes and has an excellent finish
cheers steve
satin looks great on arches n lamp surrounds, gloss on metalwork, covers minor imperfections really well, touch dry in minutes and has an excellent finish
cheers steve
northmavern
Member
- Posts
- 28
As part of my CSW refurb project I finished the wings the other day. I repainted the lamp surrounds with Halfords plastic bumper paint. It went on well, but only after Id found it did not like to go on cold. Much better at 18deg+.
I also used it on the eyebrows.
I also used it on the eyebrows.
