P38a rr front wind screen
- Thread starter Mansoor
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
how can it work only ne side cause hlf of the screen is ok and the have is not ok
stevebrookman
Well-Known Member
- Posts
- 388
I have the same problem. The screen heating system is split in two-each side has its own feed and relay.
I would check the relays first-swap them over.
I've checked the live feed to mine-it's ok.
The only thing I have not got around to yet is checking the earth connection, but I think this connection looking at RAVE is common to both sides so my screen is kaput.
Steve
I would check the relays first-swap them over.
I've checked the live feed to mine-it's ok.
The only thing I have not got around to yet is checking the earth connection, but I think this connection looking at RAVE is common to both sides so my screen is kaput.
Steve
kooky_guy
Well-Known Member
- Posts
- 2,410
- Location
- Sandhurst, Berkshire
I was hoping it was connections with mine, but I doubt it now, as a 2 inch strip on the passenger side works and a strip about an inch wide has suddenly started working again in the centre of the screen so I assume a new screen is needed. Just need a nice big stone chip...
Guy
