P38A P38 Wiring question

cornishboater · May 2, 2023

Does anyone know the pinout/description of the 2 connectors beside the inertia switch in the RH front kick panel (RH Drive). I did have a picture way back when of the colour codes and the connector.
I have soldered the connectors in the LH kick panel a few years back and want to do the same. I had in the back of my little head that one wire was relevant to the EAS inhibit switch (which is not working apart from the brake pedal)

I have hunted through RAVE but cant seem to find the descriptor

Cheers

pwood999 · May 2, 2023

The diagrams are in the 1997 version of RAVE.

cornishboater · May 2, 2023

Many thanks Pete,
Is there anywhere that gives the description of each wire?

Datatek · May 2, 2023

cornishboater said:
Many thanks Pete,
Is there anywhere that gives the description of each wire?

All the circuit information is in RAVE.

romanrob · May 2, 2023

Eas inhibit goes behind the LH kick panel. From memory, one of the connectors on the RH kick panel carries the ac/ hvac

cornishboater · May 2, 2023

romanrob said:
Eas inhibit goes behind the LH kick panel. From memory, one of the connectors on the RH kick panel carries the ac/ hvac

Cheers, that connector burnt out a couple of years ago and I soldered it the same as the ones on the LH side, the only one I am not sure of is the one beside it.

mystery · May 4, 2023

may help

cornishboater · May 4, 2023

mystery said:
may help

Cheers

Datatek · May 4, 2023

mystery said:
may help

I can't get that circuit info big enough to read clearly but it doesn't look like it's for the P38.

mystery · May 4, 2023

the original size is 4128 x 4648 px but the site reduced it to 1421 x 1600 px not a lot I can do about that

pwood999 · May 4, 2023

looks like a useful diagram . . . . . who did that one ?

Mark Piercy · May 5, 2023

mystery said:
may help

Is this l322 or p38?

Mark Piercy · May 5, 2023

from the l322 thread..

mystery · May 5, 2023

Datatek said:
Datatek said:

can't get that circuit info big enough to read clearly but it doesn't look like it's for the P38.

Click to expand...

I THINK IF YOU CHECK IT IS 1997 P38

Datatek · May 5, 2023

Unusual to see colours on a P38 diagram, but as I said it's too small to make out detail and will not enlarge on my computer.

pwood999 · May 5, 2023

mystery said:
the original size is 4128 x 4648 px but the site reduced it to 1421 x 1600 px not a lot I can do about that

Can you share the original file using Google Drive or Dropbox ? Ideally the Visio, or whatever software was used.

Datatek · May 5, 2023

pwood999 said:
Can you share the original file using Google Drive or Dropbox ? Ideally the Visio, or whatever software was used.

Was it attached as a file or inserted as a photo? The site offers both options now.

marjon · May 5, 2023

Datatek said:
Unusual to see colours on a P38 diagram, but as I said it's too small to make out detail and will not enlarge on my computer.

If you open the attached pic/file then press download on the menu top left of pic. then open the file you can enlarge it alot more.

J

mystery · May 5, 2023

its a PNG image it's the only images I find that doesn't leech colours over time ,the draw back is they are usually too large to post some times and compression software size reductions is limited

Datatek · May 5, 2023

marjon said:
If you open the attached pic/file then press download on the menu top left of pic. then open the file you can enlarge it alot more.

J

Yes it enlarges but is just a blur. I still say it doesn't look like any P38 schematic that I have seen because of the colours which are like those used on the L322.

P38A P38 Wiring question

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well fumbled member....

Well fumbled member....

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads