Ooohhh, thanks for that. I'll see if I can find a bracket and swan neck.
The connections for 7N are in the right side of the boot behind the trim, 7S are in the left side behind the trim. You must use these connections. No special loom required, make your own, I can supply the connection information if you need it.
Many thanks for that. I. guessing left and right is looking from the rear of the vehicle?
Yes
I replaced the trailer plug, better than using an adapter IMO and not much more money
Replaced the 13 pin for a 7 pin? Reduces your options more than a little.
No, replaced the old 7 pin for a 13 pin plug on the trailer
Just looking at the towbar picture, is the bracket just attached to the chassis or is there another fixing under the bumper somewhere, all the fixings i have seen so far seem to have some other horizontal bar fixed to the bracket
Yes the square Bar is fixed then there is a round bar bolted up behind the bumper between the chassis legs. You may/maynot have that in place, which is why you see them for sale with the round bar. As yours looks like it never had the option fitted then you probably dont have it.
)
No, but you do need to use the connectors provided on the P38 for the trailer socket, 7N behind the trim in right side of boot, 7S in the left side. I can give you the colours/functions, I have posted them a few times before but happy to post again.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
