p38 revs dipping

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

jerry3

Member
Posts
47
Location
Dorset
Hadn't used the rover for a couple of days, took it out last night got to a junction went to pull away and the revs just dropped then picked up again .
Any clues?
It did it a couple of more times then sorted itself out.
I've fitted new plugs and leads but don't know if it was running on gas at the time.
Also a couple of the relays in the engine bay fuse box get really hot I think they are for the fans.
Is that normal?
Cheers
 
Haven't done this fix yet.
But the problem seems to be getting worse. It very nearly cuts out with the alternator light flickering as if it's about to stall when stuck in traffic.
Also when accelerating hard I sometimes get a proper smoke cloud out the back but not always.
Its a 4.6 HSE 1997.
If it's the MAF I will get a new one . Whos best I have had a lot of stuff from Rimmers but is there someone better. I want genuine parts for reliability.
Thanks for any feedback.
 
For genuine I've used Rimmer Bros and also Dingocroft with no complaints. Woke up staring at the lights and hearing panicked voices standing around my prone body shortly after hearing the price but that was as bad as it got.
 
jerry3 said:
Haven't done this fix yet.
But the problem seems to be getting worse. It very nearly cuts out with the alternator light flickering as if it's about to stall when stuck in traffic.
Also when accelerating hard I sometimes get a proper smoke cloud out the back but not always.
Its a 4.6 HSE 1997.
If it's the MAF I will get a new one . Whos best I have had a lot of stuff from Rimmers but is there someone better. I want genuine parts for reliability.
Thanks for any feedback.
Click to expand...

If it will accelerate hard it is unlikely to be the MAF sensor. Look at the idle speed control.
 
Well I've ordered a new MAF for about £100 from Rimmers.
If it smokes a lot how can it be the idle sensor. The exhaust tips look very sooty .
 
jerry3 said:
Well I've ordered a new MAF for about £100 from Rimmers.
If it smokes a lot how can it be the idle sensor. The exhaust tips look very sooty .
Click to expand...

To much fuel at idle not enough air. Over rich at idle will slow engine over lean will make it run faster. Maybe MAF but cleaning idle control would have been a little cheaper to start with.
 
jerry3 said:
I think it's Gems .
Do you just clean with brake cleaner?
Is it easy to identify the part?
Click to expand...

Gems is near and just under throttle position sensor. Two bolts don't over tighten, make sure it's sealed on reassembly. Take it out and clean it off it maybe sticking extended. Bit of petrol or whatever you have. Thor is behind manifold on two pipes. Thor manifold looks like a bunch of bananas.
 
You must log in or register to reply here.

Similar threads

R
L322 gearbox problem 2010 TDV8 Vogue
Replies
11
Views
448
roythebus
R
ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
3K
roythebus
R
R
2000 Thor 4.6 fuel/starting problems
Replies
5
Views
469
richardtamps
R
MrMatt83
L322 3.0 td6 gearbox problems
Replies
12
Views
1K
pwood999
pwood999
P
L322 Flickering rear lights
Replies
18
Views
681
Parkheadbhoy
P
Back
Top