- Posts
- 19,284
- Location
- Buckinghamshire, UK. ('95 DT)
If RF unit unplugged you'll have to hokd key up to rear quarter light before pressing button. Also won't work if you have any dodgy microswitches in the door actuator.
P38, No glow plug light but glow plugs are getting power
- Thread starter Colleydog91
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If RF unit unplugged you'll have to hokd key up to rear quarter light before pressing button. Also won't work if you have any dodgy microswitches in the door actuator.
Colleydog91
Member
- Posts
- 36
- Location
- Coventry
its usually unplugged but i made sure i plugged it back in for all the sync attempts, must be a microswitch but it did unlock all doors when i turn key in door so should be ok, either way atleast i can easily just sync from the ignition now.
- Posts
- 19,284
- Location
- Buckinghamshire, UK. ('95 DT)
There are 3 microswitches. One detects unlock, one lock and then there's another one in the centre.
Colleydog91
Member
- Posts
- 36
- Location
- Coventry
Ah ,ok thanks for the info, could be a microswitch stopping it synicing from the door then.
brianp38dse
Well-Known Member
- Posts
- 20,035
- Location
- heathrow
Here is Martyuk`s lock test sheet
Colleydog91
Member
- Posts
- 36
- Location
- Coventry
tha
thats a good bit if info , thanks
