P38 no fuel to filter but runs???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie said:
The pick up pipe all the way to the filter needs to be air tight. It could be an incorrect fuel filter, mine had 2 sealing rings on the filter when I got it but needs only 1 on the filter, the other is in the filter head.
Click to expand...
Flossie said:
The pick up pipe all the way to the filter needs to be air tight. It could be an incorrect fuel filter, mine had 2 sealing rings on the filter when I got it but needs only 1 on the filter, the other is in the filter head.
Click to expand...
been told to by pass filter and if it runs ok put another inline filter in
 
Been told to by pass the filter and put another inline filter in I have had 2 filters and was told both times to throw away the centre seal even had housing off to check for a seal that may have been stuck up on body
 
Chrispndry said:
Been told to by pass the filter and put another inline filter in I have had 2 filters and was told both times to throw away the centre seal even had housing off to check for a seal that may have been stuck up on body
Click to expand...
I don't know if the filter housing changed during production but mine (2001) has only 1 seal on the outer rim of the filter , the filter is also domed in the middle, the housing itself has one small thick seal which seals into the dome on the filter.
 
Chrispndry said:
Been told to by pass the filter and put another inline filter in I have had 2 filters and was told both times to throw away the centre seal even had housing off to check for a seal that may have been stuck up on body
Click to expand...
The filter housing contains a fuel heater, bad idea to run without it especially on veg. The seals that come with the filter are normally needed.
 
If you remove the inner seal off what could be the wrong filter you are not filtering the fuel. Might be, not sure, where your air is getting in.
 
Been told to by pass the filter and put another inline filter in I have had 2 filters and was told both times to throw away the centre seal even had housing off to check for a seal that may have been stuck up on
Flossie said:
There's O rings on the pipe fittings, filter housing in and out. I wouldn't run without the filter. What sort of inline filter? One of them plastic rock catchers?
Click to expand...
O rings changed....going to put inline filter in as temporary fix...if it works will replace with another housing or universal filter housing...also fitting heat exchanger for heating the fuel....if all this dont work getting drunk.
 
Grrrrrr said:
Is the filter housing cracked anywhere?
Click to expand...
Not sure...tomorrow going to by pass with pipe see if it cures air problem...probably put new housing and filter on...bit peed off with garage diagnosis and them starting from tank...I used to do all this myself but I am getting on in years got arthritis in hands so restricted in tasks.. love this forum though..and the p38 ❤
 
Update....by passed filter put inline filter...no air now runs great....fault is at filter housing or filter body...ordered new unit it was a case of elimination from itp to filter???
 
You must log in or register to reply here.

Similar threads

stuu
P38A Brands advice/suggestions
Replies
4
Views
636
stuu
stuu
F
P38 DSE loss of power when driving
2
Replies
33
Views
1K
Mark Piercy
Mark Piercy
jimmacD
Back to the P38 house of pain!
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr
R
2000 Thor 4.6 fuel/starting problems
Replies
5
Views
462
richardtamps
R
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
594
Mark Piercy
Mark Piercy
Back
Top