P38 new problem with abs and traction fault

maxderby said:

Hi
I thank you all again, if new ABS sensors can be duff how do you test them before you fit them? Can we clarify where the traction ECU is, its a 2001 model and i thought it was behind the glove box and made by Wabco, I dont know why the SRS was mentioned as I know it doesnt affect the issues I have, is it just the black relay for the ABS or are other relays involved, I still think its in the wiring but willing to check things people suggest, is there anyone in Derby Derbyshire with a Nancom that wants to plug it in for a Drink, Is there also a Auto electrician in same area that would like to have a go, this bit is random I know but can anyone tell me on the EAS valve block what colours on the pipes relate to what corner, serviced the valve block and compressor now every morning the drivers front corner is on the bump stop!! and it sometimes seems to take a while to figure out what to do, meaning the air tank is full you press the button up or down depending where it is and some days it leaps there, then other time it just waits forever the leaps into action, Im suspecting the driver? I know I havent done owt stupid like snag an O ring
Cheers
Maxderby

Click to expand...

Datatek said:

Sounds like you either have a pipe in the wrong hole or a solenoid coil on in the wrong place for the EAS.

Click to expand...

maxderby said:

Hi
the pipes only reach the holes they should go in and did the solenoids one by one, it all seemed to work okayish until I did the right thing and refurbished it LOL it used to go down slowly but now its overnight

Click to expand...