P38 headlining
- Thread starter Nick B
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I will try
Tyre Tread
Member
- Posts
- 17
- Location
- Cardiff
A big thank you to Dopey for the how to and Wazzajnr for rescuing the pics.
I'm part way through the headliner replacement (Headlining out and hunting down leaks) and broke some trim clips that I wouldn't have broken had I seen this write up first - Doh!
At least It's solved the mystery of how to remove the sunroof sun blind, so a big thank you again and I shall try and remember to post pics when done.
Off to Martrim now to order a kit.
I'm part way through the headliner replacement (Headlining out and hunting down leaks) and broke some trim clips that I wouldn't have broken had I seen this write up first - Doh!
At least It's solved the mystery of how to remove the sunroof sun blind, so a big thank you again and I shall try and remember to post pics when done.
Off to Martrim now to order a kit.
- Posts
- 3,878
- Location
- Near Heathrow.
Did my headlining a few weeks back, but ran out of time on the sunroof shade.
Finally got it fitted today, but having a problem with the trim that goes around the sunroof hole & holds the headliner in place. It's fine either side & the rear, but along the front nearest the wind deflector the trim refuses to stay attached. It pushes onto the headliner & metal edge ok, but will not hold. I'm assuming it's lost the ability to grab ?
Wondering if I need something to stick it into place, or look for another trim ?
Finally got it fitted today, but having a problem with the trim that goes around the sunroof hole & holds the headliner in place. It's fine either side & the rear, but along the front nearest the wind deflector the trim refuses to stay attached. It pushes onto the headliner & metal edge ok, but will not hold. I'm assuming it's lost the ability to grab ?
Wondering if I need something to stick it into place, or look for another trim ?
Attachments
- Posts
- 12,634
- Location
- Sud ouest France !
If it has metal inside the gripping edge you can tap it lightly with a hammer to close the gap and it'll grip once again
rover75lover
Active Member
- Posts
- 210
- Location
- newport.wales.uk
if you ever bridgend way ,theres a lad there that keeps fully recovered headlinings,post covers ,you book a time he strips yours out fits new one ,keeps your old one . cracking job ,reasonable as well
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
+1 on Martrim. Everything you need and decent stuff.
- Posts
- 33,601
- Location
- North Shropshire
Sounds like a very convenient service that saves a lot of time and faff
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
An easy afternoon's work as I recall. Easier with 2 people as almost all jobs are.
- Posts
- 33,601
- Location
- North Shropshire
but if you have never done it before then its easy to crack the brittle/aged plastics
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I don't recall any issues but I don't have a sunroof. I do remember having to ease out the A and B pillar trims carefully.
