P38 front hub

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mckinlay1

New Member
Posts
21
Location
Inverkeithing fife
Hi guys
Bit of a long shot does anybody know where I can get hold of a front passengers side front hub with good wheel bearing in or near central Scotland

Thanks paul
 
hi , try our sponsors EMMOTTS of colne ,, good prices and next day delivery ,, great company ,, mention me , to jess or liam they will look after you .....
failing that try these ,,,,,, ring barry at mann automotive , lawrencekirk ,, between Aberdeen and Dundee,,, hope this helps ,, regards mozz
 
Hi guys
Bit of a long shot does anybody know where I can get hold of a front passengers side front hub with good wheel bearing in or near central Scotland

Thanks paul

Ah. You're just over the road from me.

I need the same thing and/or bearing but it's lower on my list.
 
Hi

Thanks for reply hey domino do you have the same problem as the front wheel locked up nearly crapped my pants any help would be greatly appreciated as this I my first and probably my last range rover p38

Thanks paul
 
Hi

Thanks for reply hey domino do you have the same problem as the front wheel locked up nearly crapped my pants any help would be greatly appreciated as this I my first and probably my last range rover p38

Thanks paul

You'll need RAVE, Plusgas and a large hammer. And lots of patience.
 
Hi

Thanks for reply hey domino do you have the same problem as the front wheel locked up nearly crapped my pants any help would be greatly appreciated as this I my first and probably my last range rover p38

Thanks paul

FCOL man the newest P38s are now over 14 years old - get a grip on reality.
 
Having done this just last year to both sides I used emmots for the hubs and had no problem since. If your going to do it 32mm socket and crack the hub nut before taking the wheel off I used the jack and a breaker bar and used the weight of the car to shift it, and a set of hub bearing pullers off eaby £15 undone the bolts holding the hub tightened the puller and kept tapping all the way around while tightening up the puller hub off without much swearing both sides and no they hadn't been off before.

P38s aren't too bad more so with all the online help for them they become a project a hobby a passion
 
Back
Top